Sanyo MPR-414FS specification

CAUTIONS FOR USAGE

1.If the unit is unplugged or the power to the unit is interrupted, do not restart the unit for at least 5 minutes. This protects the compressor.

2.This inner cabinet is refrigerated by the forced circulation of cooled air inside the chamber. Ensure that the intake and exhaust vents are not blocked. Adequate space should be provided between the items inside the unit to allow air circulation. Too much stock will result in temperature of about -2oC around the exhaust vent when the set temperature is 2oC. It is recommended to set the temperature to 4oC or 5oC when a large quantity of articles that should not be frozen are stored.

3.Never store corrosive materials such as acid or alkali unless the container is completely sealed up. Corrosion may lead to failure of the unit in time.

4.If the ambient temperature is fairly high, the alarm lamp is flashed, temperature display is flashed, and the buzzer sounds at the time of initial start up. The alarm is canceled automatically when the chamber temperature is decreased.

5.Once the chamber temperature has stabilized, put the items into the chamber in small batches to minimize the temperature increase.

6.Fix the shelves securely. Place items on the shelves and leave a space between the walls of the cabinet and the contents to allow air circulation. Do not place items on the floor of the chamber.

7.Always close the door firmly. The door check lamp is lit when the door is open. The alarm buzzer sounds two minutes after door opening. The buzzer can be canceled automatically when the door is closed.

8.Always open and close the door gently. Rough operation may lead fall down of stocked items, incomplete closing, or damage of door gasket.

9.In the refrigerator compartment, put the items on the shelves and do not contact the items with wall.

10.The cooling pipe is routed in the rear of the freezer. Never use a knife or a screw driver, etc. to remove the frost. They may cause damage of chamber wall or improper operation of the unit. And do not drop any heavy items or sharp edge materials onto the freezer floor.

11.Stop the freezer operation by following the procedure on page 19 “Defrosting” when the freezer is not used or at the time of defrosting of freezer. Under such condition, the freezer is not cooled down at all.

12.If an instrument requiring a power source is to be placed inside the cabinet, the cable can be lead through the access port on the back side of the cabinet. After using of the port, a rubber cap and insulation should be replaced to seal the access port. Failure to do this can affect the temperature uniformity inside the cabinet and lead to condensation on the outside of the access port.

38		6

MPR-414F, MPR-414FS specifications

The Sanyo MPR-414FS is a high-quality refrigerator designed to meet the diverse needs of modern households. It offers a combination of aesthetic appeal, advanced technologies, and efficient performance, making it an ideal choice for families and individuals alike.

One of the standout features of the MPR-414FS is its spacious interior. With a generous capacity, it provides ample room for storing various food items, beverages, and groceries, ensuring everything remains organized and easily accessible. The adjustable shelves allow users to customize the layout according to their needs, accommodating larger items or maximizing storage space for smaller ones.

The Sanyo MPR-414FS is equipped with a powerful inverter compressor, which not only enhances energy efficiency but also minimizes noise levels. This technology allows the refrigerator to maintain a consistent temperature, ensuring that food remains fresh for longer periods. The inverter compressor also adapts to the cooling demands, providing optimal performance while reducing energy consumption.

Another noteworthy feature is the multi-air flow system, which ensures even cooling throughout the refrigerator. This innovative design prevents hot spots and helps maintain consistent temperatures in both the refrigerator and freezer compartments. Consequently, this promotes the freshness of fruits, vegetables, and other perishables, extending their shelf life.

The MPR-414FS incorporates advanced humidity control technology, which is particularly beneficial for maintaining the quality of fruits and vegetables. By regulating the humidity levels within the crisper drawers, this refrigerator helps preserve the freshness and nutritional value of produce, reducing food waste.

In terms of design, the Sanyo MPR-414FS boasts a sleek and modern appearance with a stainless-steel finish, making it a stylish addition to any kitchen. The appliance features a user-friendly interface with easy-to-use controls, ensuring that users can adjust settings with minimal effort.

Safety is another key consideration in the design of the MPR-414FS. It includes a door alarm that alerts users if the door has been left ajar, preventing unnecessary energy loss and ensuring that food remains at the right temperature.

In summary, the Sanyo MPR-414FS is a well-rounded refrigerator that combines functionality, energy efficiency, and style. With its spacious design, advanced cooling technologies, and user-friendly features, it stands out as a reliable option for those looking to enhance their kitchen’s efficiency while maintaining a fresh and organized food storage regimen.