Before Commencing Operation, Installation site

BEFORE COMMENCING OPERATION

Installation site

To operate this unit properly and to obtain maximum performance, install the unit in a location with the following conditions:

1. A location not subjected to direct sunlight

Installation in a location subjected to direct sunlight may lead to inadequate cooling.

2. A location with adequate ventilation

Leave at least 10cm around the unit for ventilation. Poor ventilation will result in a reduction of the refrigeration capacity.

3. A location away from heat generating sources

Avoid installing the unit near heat-emitting appliances such as gas ranges or stoves. Heat can cause inefficient refrigeration.

4. A location with a sturdy and level floor

Install the unit on a sturdy floor to avoid vibration and noise. Placing the unit on an unsteady floor may cause vibration and noise.

WARNING

Be sure to install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not adequate, this may result in injury from the unit falling or tipping over.

CAUTION

Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over.

5. A location not prone to high humidity

WARNING

Do not use the unit outdoors. Current leakage or electric shock may result if the unit is exposed to rain water.

Never install the unit in a humid place or a place where it is likely to be splashed by water.

Deterioration of the insulation may result which could cause current leakage or electric shock.

Do not install the unit under water pipes or steam pipes. Deterioration of the insulation may result

which could cause current leakage or electric shock.

6. A location without a flammable or corrosive gas

Avoid placing the unit where chemicals are stored or gases are produced. Also avoid areas where there is a great deal of dust.

WARNING

Never install the unit in a flammable or volatile location. This may cause explosion or fire.

Never install the unit where acid or corrosive gases are present as current leakage or electric shock

may result due to corrosion.

7.A location not subjected to strong electromagnet interference

MPR-411FR, MPR-411F specifications

The Sanyo MPR-411F and MPR-411FR are cutting-edge high-performance air conditioning units designed to provide optimal cooling and energy efficiency for residential and commercial spaces. Sanyo, a well-known brand in the HVAC industry, has equipped these models with innovative technologies to ensure superior performance and user comfort.

One of the standout features of the MPR-411F and MPR-411FR is their advanced inverter technology. This technology allows the units to adjust their cooling capacity based on indoor temperature conditions, ensuring a constant and comfortable environment. The inverter system not only enhances energy efficiency, significantly reducing electricity consumption but also minimizes noise levels, making the units incredibly quiet during operation.

Both models come equipped with a high-performance air filter that helps to purify the air, removing dust, allergens, and other impurities. This feature is particularly beneficial for allergy sufferers and individuals with respiratory issues, as it contributes to a healthier indoor environment. Additionally, the filters are designed for easy cleaning and replacement, promoting convenience and long-term use.

The MPR-411F and MPR-411FR also feature a sleek, modern design that easily complements any interior décor. The compact units can be wall-mounted or placed on the floor, providing flexible installation options that cater to various spaces and preferences.

In terms of control options, these models are equipped with user-friendly remote controls that allow for easy temperature adjustments and settings changes from anywhere in the room. Some variants, particularly the MPR-411FR, may offer smartphone compatibility, enabling users to control their air conditioning units via a dedicated app, ensuring comfort even before arriving home.

Energy efficiency is further enhanced in these models by the inclusion of R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This reflects Sanyo's commitment to environmentally friendly practices, as well as compliance with industry regulations.

Overall, the Sanyo MPR-411F and MPR-411FR represent a perfect blend of advanced technology, user-centric features, and environmental consciousness, making them ideal choices for anyone seeking reliable and efficient cooling solutions. With their combination of performance and eco-friendliness, these models stand out in the competitive HVAC market.