JAMO JSS4-VC2 manual Introduction, Connecting

Page 2

Introduction

Your JSS4-VC2 Speaker Selector-Volume Control is designed to operate with up to 4 pairs of loudspeakers of 4, 8, and 16 Ohms impedance in any combination. It can be used with one or two stereo amplifiers, or with 4 Channels of a surround-sound type sound system. Each of the 4 output Control channels can be individually switched to the amplifier connected to A INPUT, or one connected to the B INPUT. Thus it is convenient to listen to different program material in different rooms, swap front and rear channels in a surround-sound system, etc.

Impedance loading protection for the power amplifier (s) is built-in, and fully automatic. Four 100 Watt AUTOMATCH ™ attenuators are employed, pre-set so that the worst-case operating condition (four pairs of-4 Ohm speakers operating simultaneously at maximum volume) will appear as a 4 Ohm load on the amplifier. Higher impedance speakers and/or lower volume settings of the controls will reflect a higher impedance to the amplifier, so that safe operation is assured.

Since impedance matching protection is achieved by use of AUTOMATCH ™ transformers, there is no heat generated in the matching process- this assures safe operation in a closed environment. There are no extra buttons to operate that must be remembered to maintain safe operation. An additional advantage is that there is no power loss in the JSS4-VC2. There is a level drop of -6 dB to the speakers at maximum volume settings of the JSS4-VC2 controls (at the factory setting), but this is not a power loss. When all 4 controls are set at maximum volume, the full power of the source amplifier is available, divided equally among each of the 4 speaker pairs.

Both the A and B amplifier inputs are identical, and completely independent of each other. Speakers selected for operation with the A amplifier input will have the same impedance protection as those that may be operating with the B amplifier. The number of pairs of speakers in operation on either channel will have no effect on any operating on the other.

Other JSS4-VC2 features include power handling capability of up to 100 Watts RMS continuous at 8 Ohms in any switching mode. The LEFT and RIGHT channels are completely separate

to assure safe operation with alt types of amplifiers, including those with “bridging” outputs. The volume attenuators are tapped auto-transformer type with attenuation of 3 dB/step except for the last 2, which are 4 and 6 dB. These controls do not heat up in operation, nor do they deteriorate over long time use.

Connecting

Connections to amplifiers and speakers are illustrated in the back of these instructions. Remember that the LEFT and RIGHT circuits are separate, so connections must be made correctly or the system will not operate properly.

Heavy duty push-to-open connections are provided on the rear panel to insure positive, long lasting, connections. To make connections, strip about 3/8" of insulation from the wire end. Push the connector tab toward the rear panel to open the hole. Insert the stripped wire end into the opening , and release the tab. Make sure no loose ends stick out to cause problems. Check that the bare wire, not the insulation, is connected to the hole.

If only one amplifier is to be used, connect it to the AMPLIFIER “A” terminals as shown. Make sure the + and -, and L and R channel connections are correct to avoid unsatisfactory operation or dead channels.

The same precautions should be used when connecting the speakers, crossed channels, polarity, or grounds will result in improper operation.

Image 2
Contents JSS4-VC2 Connecting IntroductionUsing Scope of the warranty

JSS4-VC2 specifications

The JAMO JSS4-VC2 is a sophisticated, high-performance loudspeaker that exemplifies innovative audio engineering and design, making it an ideal choice for audiophiles and casual listeners alike. This model stands out due to its remarkable sound quality, modern aesthetics, and user-friendly features, ensuring that it fits seamlessly into any home or entertainment setup.

One of the key features of the JSS4-VC2 is its advanced driver configuration. Boasting a 4-inch woofer and a 1-inch tweeter, this loudspeaker is engineered to deliver an expansive soundstage with precise bass response and clear, detailed highs. The woofer is constructed from high-quality materials designed to minimize distortion and improve overall sound clarity, while the tweeter provides an expansive frequency range that captures the finest nuances in music.

In terms of sound technology, the JAMO JSS4-VC2 incorporates innovative acoustic innovations, such as a sophisticated crossover network. This network effectively divides the audio signal between the woofer and tweeter, ensuring that each driver operates within its optimal frequency range for superior performance. The result is a well-balanced audio experience characterized by deep bass, rich midranges, and crisp treble, making it perfect for various genres of music and audio content.

Aesthetically, the JAMO JSS4-VC2 is designed to enhance any living space. It features a sleek, modern look available in multiple finishes, allowing users to choose a style that complements their interior decor. The compact design ensures that it fits well into smaller environments without sacrificing performance, making it a versatile option for bookshelves, media cabinets, or stands.

Durability and efficiency are also prominent characteristics of the JSS4-VC2. The speaker is built with robust materials that are designed to withstand the rigors of everyday use while maintaining acoustical integrity. Additionally, it boasts a high sensitivity rating, meaning it can produce powerful sound with minimal amplification, making it easy to integrate into existing setups without the need for extensive modifications.

Overall, the JAMO JSS4-VC2 loudspeaker is a compelling choice for anyone looking to elevate their audio experience. With its combination of cutting-edge technology, elegant design, exceptional sound quality, and durability, it represents a significant investment in both performance and aesthetics. Whether for casual listening or serious audio enjoyment, the JSS4-VC2 is engineered to meet and exceed expectations.