Moffat E20AC Dimensions, Shelves, Installation requirements, Installation clearances

4517 BS ACSeries specs V3 24/6/05 10:52 AM Page 10

TECHNICAL SPECIFICATION SHEET FOR

BLUE SEAL ELECTRIC COMBI STEAMER

AC SERIES E20AC DD 20 x 1/1GN or 10 x 2/1

Dimensions
Width	1170mm
Depth	895mm
Height	1090mm
Weight	230kg
Packed Dimensions
Width	1320mm
Depth	1040mm
Height	1220mm
Weight	255kg
Shelves
1/1 GN	20
2/1 GN	10
Shelf Spacings	70mm

Installation requirements

(for precise installation instructions, please refer to the unit’s installation manual).

Power connection requirements

Multi pole circuit breaker and all pole disconnection isolator switch installed near the appliance.

Supply line voltage;

400-415V ~ 50Hz, 3P+N+E

Special voltage options available on request.

Installation clearances

- rear 25mm

- right 500mm*

- left 50mm

*Clearance required on fixed installations for service accessibility.

If heat sources are located near the RH side of the AC combi, ensure that a minimum distance of 400mm is maintained.

Install in accordance with local bodyregulationsonlyonhorizontal surfaces and not against combustible walls.

Water connection requirements

-Cold water

-Flow pressure (2 to 6 bar)

-soft water connection*

-shut-off valve with return flow inhibitor and dirt filter

-water supply R3/4

-R50 waste water connection

(*Water softener may be required. Please refer to installation manual for water treatment values.)

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia

Moffat Pty Limited

Victoria/Tasmania

740 Springvale Road Mulgrave, Victoria 3170 Telephone 03-9518 3888 Facsimile 03-9518 3833 vsales@moffat.com.au

New South Wales

Telephone 02-8833 4111 nswsales@moffat.com.au

South Australia

Telephone 03-9518 3888 vsales@moffat.com.au

Queensland

Telephone 07-3630 8600 qldsales@moffat.com.au

Western Australia

Telephone 08-9562 0263 jberent@moffat.com.au

New Zealand

Moffat Limited

Power Connection
Total (kW)	31
Convection power (kW)	30
Rated Current (A) (400V)	45

IPX5 spray-proof and hose proof.

Optional Extras

SC Core temperature probe

SPT20 Stainless steel stand with 12 x 1/1 or 6 x 2/1 GN shelves to suit 20AC DD

SST20 Removable rack complete with fitting frame alternative to side runners to suit 20AC DD

TLT20 Removable frame for oven and plate racks to suit 20AC DD

SGT20 Removable oven rack to suit 20AC DD

PRT20 Plate banquet rack to suit 20AC DD / 60 plates

CRT20 Trolley for removable oven rack with drip tray to suit 20AC DD

CPT20 Thermal cover for plate banqueting system to suit 20AC DD

KP004 Set of four legs for bench mounting

A = WATER CONNECTION R3/4 (SOFTENEDWATER)refertoinstallation manual for water treatment values.

B = WATER CONNECTION R3/4

C = DRAIN CONNECTION Ø60

D = ELECTRICAL CONNECTION ENTRY E = HIGH/LOW PRESSURE RELIEF VENT F = OVEN VENT Ø80

Christchurch

Telephone 03-389 1007 sales@moffat.co.nz

Auckland

Telephone 09-574 3150 sales@moffat.co.nz

In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change specifications and design without notice.

Printed in China

©Copyright Moffat Ltd Moffat/4517-E20/BH/3.5M/6.05