Morphy Richards 760 manual Operating controls, Operating the food processor

Storage dome

1Fit the processor bowl ‰ and processor lid Ê onto the processor base.

2Place the storage dome Ë onto the processor lid.

3Add the spindle  into the circular hole in the storage dome.

4Place the plastic blade holder Í and metal chipping disc Ô into the two longer slots.

5Add the slicing blades Ì Ó and shredding blades Î Ï into their slots in the storage dome.

Spatula

Slide the spatula È into the slot provided on the side of the processor body ⁄.

Cord storage

The mains lead can be stored by feeding it into the opening at the back of the processor body.

Operating controls

The processor and blender control dials have settings as follows:

Off/9+ speeds

Pulse

The speed can be adjusted whilst the processor or blender is in use.

Using the pulse button allows greater control over the texture of the food produced. It is only intended to be used for short ‘bursts’ of processing or blending.

Operating the food processor

Setting up

1Ensure the processor is unplugged from the mains.

2Fit the safety cover ¤ into the processor body and turn anti- clockwise firmly until it ‘clicks’ into place (the arrows will now be lined up). THE FOOD PROCESSOR WILL NOT OPERATE WITHOUT THE SAFETY COVER IN PLACE.

3Place the processor bowl ‰ onto the processor body ⁄, (there is no need to turn the bowl).

4When fitted correctly, the handle will be to the right of the assembly, and the ridge on the base of the bowl will fit into the slot at the back of the processor body.

5Fit the spindle  onto the motor shaft fl and the appropriate attachments onto the spindle. Refer to following section, ‘Fitting and using the tools’.

6Holding the processor lid Ê by the feed tube, fit the lid by rotating anti-clockwise.

5