Morphy Richards KT43941 MUK Rev 1 manual Before First, Use, Operating, Appliance, Hints and Tips

43941_x 30/11/2010 10:57 Page 5

	BEFORE FIRST	• To re-boil, switch to ON	For stainless steel kettles
	USE	again. If the appliance has	please follow the
		just switched off wait a	instructions carefully.
	Before using the appliance	minute or so before
	for the first time, fill with	switching it back on again.	Alternatively use citric acid
	water, boil and pour away.		crystals (available from
		• If you do not put in enough	most pharmacies) as
	OPERATING THE	water, or switch on the	follows:
		appliance when it is empty,	1 Fill the appliance 3/4 full,
	APPLIANCE	the safety cut-out will
		switch off the power	boil, then unplug the
1 Wherever possible fill		automatically. If this	appliance (remove the
	through the spout, as this	happens, refill and wait a	cordless kettle from the
	helps to free the filter from	few minutes for the element	base unit) and stand it in an
	limescale build-up.	to cool, then use as	empty sink or bowl.
		normal.

•The water level indicators allow you to easily see the amount of water in the kettle.

•Always ensure that the appliance is filled till the water in the kettle is filled to at least the minimum level shown on the water gauge.

•Boil only as much water as you need as this saves electricity.

2Place the appliance on the base unit, ensuring the appliance locates on to the 360° connector.

•Due to the oval shape of this product we recommend alining the kettle with the power base for better stability

3Plug in and switch on at the wall socket.

4Switch the appliance on. The water level indicator will light up.

5When the water boils the appliance will switch off automatically.

•If you are using the appliance for the first time, pour away the boiled water.

6Lift the appliance from the base unit by the handle ensuring you hold the appliance level.

		2 Gradually add 50gm of
	Filter removal		citric acid crystals to the
			water, then leave the kettle
			to stand. Do not use a
1 Open the lid.			more concentrated
2 Lift the filter upwards from			solution.
	its location using the tab	3 As soon as the
	provided.		effervescence subsides,
			empty the appliance and
3 To refit the filter, slot it into			rinse it thoroughly with cold
	the side wall guides and		water.
	press down firmly. Ensure
	the filter is correctly located	4 Wipe the outside of the
	into the central guide.		appliance thoroughly with a
			damp cloth to remove all
	WARNING: Make sure		traces of acid which may
	that the filter is put in		damage the finish.
	correctly otherwise the		IMPORTANT: Ensure that
	lid will not close.
			the electrical connections
	Descaling		are completely dry before
			using the appliance.
	IMPORTANT: As this		HINTS AND TIPS
	appliance is fitted with a
	concealed element it must
	be descaled regularly. The		Cleaning and
	frequency of descaling		maintenance
	depends on usage and the
	hardness of the water in		WARNING: Always
	your area.		disconnect the plug
	Excessive scale can cause		from the mains and
			allow the appliance to
	the appliance to switch off		cool before cleaning.
	before boiling and may
	damage the element		Wipe the outside with a
	invalidating the warranty.		damp cloth.
	It is essential that regular		IMPORTANT: Do not use
	descaling takes place.		abrasive cleaners on the
			outside of the appliance
	Remove hard scale using a		which may scratch the
	proprietary descaling		surface.
	product suitable for
	stainless steel, glass or
	plastic.

3For details of other Morphy Richards products, please see our website: