Professional Series PS75851 user manual Using the appliance, Tips

Using the appliance

The appliance will only function if all parts have been properly assembled and the lid has been properly locked in place with the clamp.

1.Wash the fruit and/or vegetables and cut them into pieces that fit into the feeding tuble.(Fig.7)

2.Make sure the juice jug has been placed under the spout.

3.Switch the appliance on by turning the control knob to setting 1(low speed) or 2 (normal speed).( Fig.8)

Speed 1 is especially suitsble for soft fruits and vegetables such as wa- termelons, grapes, tomatoes, cucumbers and raspberries.

Speed 2 is suitable for all kinds of fruits and vegetables.

4.Put the pre-cut pieces in the feeding tube and gently press them down towards the rotating filter by means of the pusher.(Fig.9)

Do not exert too much pressure on the pusher, as this could affect the quality of the end result and it could even cause the filter to come to a halt. Never insert your fingers or an object into the feeding tube.

After you have processed all ingredients and the juice flow has stopped, switch the appliance off and wait until the filter has stopped rotating.

Tips

1.Use fresh fruit and vegetables, as they contain more juice, pineapples, beetroots, celery stalks, apples, cucumbers, carrots, spinach, melons, tomatoes, pomegranates, oranges and grapes are particularly suitable for processing in the juice extractor.

2.You don’t have to remove thin peels or skins. Only thick peels, e.g. those of oranges, pineapples and uncooked beetroots need to be removed.

3.When preparing apple juice, remember that the thickness of the apple juice depends on the kind of apple you are using. The juicer the apple, the thinner the juice. Choose a kind of apple that produces the type of juice you prefer.

4.Apple juice turns brown very quickly. You can slow down this process by adding a few drops of lemon juice.

5.Fruits that contain starch, such as bananas, papayas, avocados, figs and mangoes are not suitable for processing in the juice extractor. Use a food processor, blender or bar blender to process these fruits.

6.Leaves and leaf stalks of e.g. lettuce can also be processed in the juice extractor.

7.Drink the juice immediately after yo have extracted it. If it is exposed to air for some time, the juice will lose its taste and nutritional value.

8.To extract the maximum amount of juice, always press the pusher down slowly.

9.The juicer is not suitable for processing very hard and /or fibrous/starchy fruit or vegetables such as sugar cane.