Lincoln 3270-2, 3262-2, 3240-2 service manual Assembly. Check for damaged or torn belting. Check

Page 10

 

 

assembly. Check for damaged or torn belting. Check

 

 

conveyor shaft bearings for damage or excessive wear.

 

 

Repair or replace conveyor components as needed.

Conveyor speed varying or

Power supply

Check for a steady 120VAC supply to the conveyor

intermittent

 

control. If voltage is not steady, trace back to power

 

 

supply.

 

 

Control, conveyor

Check for a steady DC voltage output at terminals A+

 

 

and A-. If voltage is not steady, proceed. Check for

 

 

5 VDC output from the conveyor control at terminals

 

 

+5V(red) and COM (black). If there is no voltage output,

 

 

replace the conveyor control. If there is DC output,

 

 

proceed.

 

 

Motor, conveyor

Check conveyor motor and gearbox for any visible

 

 

damage. If there is apparent damage, repair or replace

 

 

conveyor motor. Check motor brushes for excessive or

 

 

abnormal wear. Replace motor brushes as needed.

 

Hall effect sensor/magnet

Check to be sure that the Hall effect sensor and

 

 

magnet are mounted on the motor. Check for any

 

 

visible damage to the Hall effect sensor and magnet. If

 

 

there is visible damage, repair or replace as needed. If

 

 

there is no visible damage, check for a frequency

 

 

output from the hall effect sensor at terminals SIG

 

 

(white) and COM (black).

 

 

Readings should be as follows:

 

 

2:15 cook time

56 Hz. approx.

 

 

5:00

25 Hz. approx.

 

 

10:00

13 Hz. approx.

 

 

16:00

8 Hz. approx.

 

 

If these readings are not achieved, replace the Hall

 

 

effect sensor/magnet

10

Impinger X2 – Analog Service Manual – Dom & Int’l

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Impinger X2 Ovens With Analog Controls Temperature Control PhasePower Supply Main FAN Circuit3240-2 230VAC 50 HZ Schematic Diagram Model 3240-2, 3262-2, 3270-2 50 HZ Troubleshooting Guide Symptom Possible Cause EvaluationBearings. Replace bearings as needed With Power on and Thermocouple Leads Attached to the Electronic TemperaturePage Assembly. Check for damaged or torn belting. Check Troubleshooting Guide Page Page With Power on and Thermocouple Leads Page Shaft and Blower Wheel Replacement Impinger X2 Series OvensPage Fuse Holder Replacement RELAY, Main FAN, ReplacementTIMER, 30 Minute Cool Down Replacement SWITCH, ON/OFF ReplacementAIR Pressure Switch Adjustment Burner Control ReplacementAIR Pressure Switch Replacement Electronic Temperature Control ReplacementTemperature Regulation Valve Replacement Hairpin Switch Thermocouple ReplacementTHERMOSTAT, HI-LIMIT Replacement GAS Valve ReplacementSpark Igniter Replacement Main Burner Orifice ReplacementPilot Orifice Replacement Conveyor Motor ReplacementHall Effect Sensor Replacement Conveyor Control ReplacementConveyor Control Programming Chamber Drive Constant Length Type Dayton GleasonConveyor Control Programming Dayton MOTOR, Direct Drive Conveyor Control Programming Dayton MOTOR, Right Angle Drive Page This page intentionally left blank General View Letter Part Number DescriptionPage Oven Cavity Page Control BOX Page BURNER/DRIVE END Page CONVEYOR, Single Page CONVEYOR, Dual Belt
Related manuals
Manual 40 pages 14.33 Kb Manual 2 pages 2.66 Kb

3240-2, 3270-2, 3262-2 specifications

The Lincoln 3270-2 is a state-of-the-art welding machine designed for professional welders who require precision, efficiency, and reliability in their welding tasks. This versatile unit is particularly well-suited for MIG and TIG welding, making it an essential tool for both industrial applications and hobbyist projects.

One of the standout features of the Lincoln 3270-2 is its advanced inverter technology. Inverter technology allows for a more compact design while delivering high power output. This results in a machine that is lightweight and portable, yet capable of handling demanding welding jobs with ease. The inverter system also enhances efficiency, reducing overall energy consumption while maintaining excellent welding performance.

The 3270-2 is equipped with a user-friendly interface, providing welders with intuitive controls to easily adjust settings such as voltage, wire feed speed, and gas flow. Its digital display allows for quick monitoring of parameters, enabling users to make precise adjustments on the fly. This feature is especially beneficial for novices who may need a bit of guidance while getting accustomed to the different welding processes.

Another notable characteristic of the Lincoln 3270-2 is its compatibility with a wide range of materials and thicknesses. It effectively welds various metals, including mild steel, stainless steel, and aluminum, making it suitable for numerous applications. The machine can effortlessly adapt to a variety of welding tasks, from thin sheet metal work to thicker structural components.

Safety is a top priority in the design of the 3270-2. It comes equipped with several integrated safety features, including thermal overload protection, which prevents the machine from overheating during extended use. This attention to safety helps to protect both the welder and the equipment, ensuring a reliable and long-lasting machine.

In addition to its impressive technical specifications, the Lincoln 3270-2 boasts exceptional build quality. The robust construction of the unit ensures it can withstand the rigors of a busy workshop or job site. Its durable outer casing provides protection against dust and debris, enhancing its longevity.

With its combination of portability, advanced technology, user-friendly interface, and robust performance, the Lincoln 3270-2 stands out as an ideal choice for professional welders. Whether for fabricating, repairs, or maintenance, this welding machine is designed to meet the high demands of modern welding practices, delivering both efficiency and superior weld quality.
Top Page Image Contents