Introduction
What is this Quick-start?
This
For full installation instructions, you must refer to the installation (IM) manuals supplied with the equipment.
What are these MSP-ULOG1 and MSP-ULOG2 systems?
They are level, contents, or flow measurement and control systems. Typical applications include wet well level (and pump) control, tank contents measurement, and open channel flow measurement.
The system comprises a mains or DC powered MCULOG control unit, an MSP900SH ultrasonic transmitter with a mounting kit, and manuals.
Figure 1: MCULOGW – | Figure 2: MSP900SH | Figure 3: MCULOGP – |
About the MCULOG Control Unit
The MCULOG unit is a member of the MCU900 family of control units. It has:
•Full support for a single MSP900SH ultrasonic transmitter – measuring level by default
•a
•a 6 button keypad
•an LED indicator
•an intuitive menu system – for setting up
•2 digital inputs
•5 relay outputs (e.g. for controlling pumps, indicating alarms, etc.)
•a
•a 4,800 event logging capability.
All setting up is achieved from the front panel of the MCULOG control unit.
About the MSP900SH Ultrasonic Transmitter
This is a
The other manuals
The following manuals are supplied along with this
MCULOG: | MSP900SH: |
Installation manual (IP2030/IM) | Installation manual (IP2040/IM) |
Safety instructions (IP2030/SI) | Safety instructions (IP2040/SI) |
Full operation manuals IP2030/OM and IP2040/OM are available on request from Mobrey Measurement, and are available on the web at www.mobrey.com
(IP2042/QS) | 2 | January 2006 |