TROUBLESHOOTING GUIDE
You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service.
PROBLEM | POSSIBLE CAUSE |
|
Appliance does not operate. | Not plugged in. |
|
| The circuit breaker tripped or a blown fuse. | |
Temperature inside the appliance is too warm. | Temperature control is set too warm. | Turn the |
| control to a cooler setting and allow several hours | |
| for the temperature to stabilize. |
|
| Door is kept open too long or is opened too | |
| frequently. Warm air enters the appliance every | |
| time the door is opened. Open the door less | |
| often. |
|
| The door is not closed completely. |
|
| The door gasket does not seal properly. |
|
| The appliance has recently been disconnected | |
| for a period of time. 4 hours are required for the | |
| appliance to cool down completely. |
|
Temperature inside the appliance is too cold. | Temperature control is set too cold. | Turn the |
| control to a warmer setting and allow several | |
| hours for the temperature to stabilize. |
|
Vibrations. | Check to assure that the appliance is on a level | |
| surface. |
|
| The appliance is touching the wall. | |
| appliance and move it from the wall. |
|
| If continued vibration occurs, turn off the | |
| appliance and unplug the power plug. Contact | |
| Customer Service Dept. for further assistance. | |
Moisture forms on inside appliance walls. | Door is slightly open. |
|
| Door is kept open too long, or is opened too | |
| frequently. Open the door less often. |
|
| The door is not sealed properly. |
|
Moisture forms on outside of appliance. | Door is slightly open, causing cold air from inside | |
| the appliance to meet warm moist air from | |
| outside. |
|
The door will not close properly. | The appliance is not on a level surface. |
|
| The gasket is dirty. |
|
10 | EN |