Merco Savory POP-2/4 Installation, Electrical Specifications, Mechanical Dimensions Warranty

Page 3

INSTALLATION

Install the POP-2/4 in the most convenient location for ease of cleaning, maintenance, and general operation. Avoid installing in locations with drafts, close proximity to grease or vapor-producing appliances, or other high ambient heat equipment. Allow approximately 1” clearance on sides and back of unit for proper air circulation. Allow sufficient overhead clearance for proper operation of this unit.

WARNING:

This toaster must be plugged into the proper voltage which is specified on the data plate located on the back panel of the toaster. Use of any other voltage or altering of the plug or cord may damage the unit, will void the warranty, and may cause injury.

ELECTRICAL SPECIFICATIONS

VOLTAGES

AMPERAGE

MAX. POWER

FREQUENCY

PHASE

CORD

PLUG

(VOLTS AC)

AMPS

(KW)

(HZ)

 

(SUPPLIED)

(SUPPLIED)

120

14.8

1.8

50/60

1

3'

NEMA 5-15P

208

9.1

1.9

50/60

1

3'

NEMA 6-15P

220

9.6

2.1

50/60

1

3'

NEMA 6-15P*

240

10.4

2.5

50/60

1

3'

NEMA 6-15P*

* NOTE: Non- U.S.A. models supplied without plug

The circuit on which the receptacle is installed must be of adequate wiring size and sufficient capacity to meet the requirements indicated on the unit data plate and in conformance with the National Electrical Code and local electrical installation codes. Failure to meet these requirenments will void the warranty.

SPECIFICATIONS (Standard Models)

MECHANICAL DIMENSIONS

WARRANTY

The POP-2/4 toaster is guaranteed to be free of defects in material and workmanship for a period of one (1) year from date of purchase or 18 months from date of shipment from the factory, whichever comes first, provided that the equip- ment is utilized to the manufacturer’s recommendations and instructions.

The POP-2/4 is warranted on an exchange basis only. Please contact our Service Department at 1-800-701-2992 for information.

A warranty registration card is provided with each toaster. Complete all equested information on this card and return to Merco Savory, Inc. immediately to insure proper warranty registration. Damage resulting from accident, alterations, misuse, abuse, improper installation or failure to follow use and care instructions will void the warranty.

**The warranty is applicable in the Continental U.S.A. and Hawaii only.

3

Image 3
Contents POP-2/4 Table of Contents Cleaning InstructionsOperating Instructions Installation Electrical SpecificationsMechanical Dimensions Warranty Sequence of Operations REMOVAL, Installation and Adjustments Case Cover / Control PanelRelease Button C. Board Power SwitchPower Cord Outer Heater Card AssemblyCenter Heater Card Assembly

POP-2/4 specifications

The Merco Savory POP-2/4 is a state-of-the-art cooking and holding solution designed to enhance the efficiency of commercial kitchens. This innovative appliance stands out for its flexibility and versatility in preparing and maintaining a variety of savory foods.

One of the main features of the POP-2/4 is its ability to cook a wide range of menu items, including roasting meats, baking breads, and steaming vegetables—all in one compact unit. The appliance can accommodate multiple food types simultaneously, thanks to its spacious cooking chamber. Additionally, the unit's ergonomic design allows for easy loading and unloading, making it user-friendly for kitchen staff.

Technologically speaking, the Merco Savory POP-2/4 employs advanced cooking technologies that ensure food is prepared evenly and retains its moisture and flavor. The combination of convection cooking and smart humidity controls allows for precise temperature management. This results in perfectly cooked dishes that meet the high standards of culinary excellence. Furthermore, the unit's digital control panel is intuitive and allows for easy programming of cooking times and temperatures, ensuring consistency and reliability in food preparation.

Another noteworthy characteristic of the POP-2/4 is its energy efficiency. The appliance is designed to minimize energy consumption while maximizing output. This feature not only helps in reducing operational costs but also contributes to a more sustainable kitchen environment. The use of high-quality materials in its construction ensures durability and longevity, making it a worthwhile investment for any food service operation.

The Merco Savory POP-2/4 is also equipped with built-in cleaning mechanisms that facilitate easy maintenance. The removable parts are dishwasher safe, simplifying the cleaning process and helping to maintain hygiene standards in a busy kitchen.

In conclusion, the Merco Savory POP-2/4 is a comprehensive solution for upgrading commercial cooking operations. It combines advanced technologies with user-friendly features, making it ideal for restaurants, catering services, and other food establishments that require reliable and efficient cooking equipment. With its versatility, efficiency, and ease of use, the POP-2/4 stands out as a vital tool for culinary professionals looking to elevate their savory dish offerings.