Battery Safety Information

Transmitter Battery Replacement

1,5V x 4

“AAA” (LR03)

For best performance, we recommend replacing the batteries that came with the transmitter with four, new “AAA” (LR03) alkaline batteries.

•Locate the battery compartment door on the bottom of the transmitter.

•Loosen the screws in the battery compartment door. Remove the door.

•Insert four “AAA” (LR03) alkaline batteries into the battery compartment.

•Replace the battery compartment door and tighten the screws.

Hint: You can also use the included AC adaptor to power the transmitter.

In exceptional circumstances, batteries may leak ﬂ uids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a ﬁ re. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.