Maytag W10315181A Grounding Instructions, Electrical Requirements, Settings, Features

Page 3

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

■A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

■A time-delay fuse or time-delay circuit breaker.

■A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

■For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

This device complies with Part 18 of the FCC Rules.

Settings

Clock

12-hour (12:00-11:59).

To Set Clock:

1.Touch CLOCK.

2.Enter time.

3.Touch CLOCK or the Start control.

Timer (on some models)

Timer can be used independently during any cooking program.

To Set Timer:

1.Touch the Timer control.

2.Enter time.

3.Touch the Timer control or the Start control.

Vent Fan

High, low and off. Comes on automatically as cooling fan during any cook function.

Control Lock

Activate to avoid unintended start. Touch and hold the Cancel control for about 3 seconds until 2 tones sound and padlock icon appears in the display. Repeat to unlock control.

Tones

Programming tones and signals. Touch and hold number pad “1” for about 3 seconds to turn off programming tones. Repeat to turn back on. Touch and hold number pad “2” for 3 seconds to turn off all tones. Repeat to turn back on.

Demo Mode

Activate to practice using the control without actually turning on the magnetron. Touch and hold number pad “3” for 3 seconds. The “DEMO” icon will appear in the display. Repeat to exit Demo Mode.

Features

Cooking Rack

Use only for 2-level cooking. To avoid damage to the microwave oven, always remove rack after 2-level cooking. To avoid damage to the microwave oven due to soil buildup, clean rack supports often.

Turntable

For best cooking results, do not operate the microwave oven without having the turntable in place.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Important Safety Instructions Microwave Hood Combination SafetyW10315181A Important Safety Instructions Electrical Requirements SettingsFeatures Grounding InstructionsCookware and Dinnerware Microwave Oven UseMicrowave Oven Care Replacement Parts and Cleaning Supplies TroubleshootingThis limited warranty does not cover W10315181ASP PN W10315183A

W10315181A specifications

The Maytag W10315181A is a premium replacement dishwasher spray arm designed to enhance the cleaning performance of your dishwasher. Engineered with advanced technology and a focus on reliability, this component reflects Maytag's commitment to producing appliances that deliver outstanding results.

One of the key features of the W10315181A is its innovative spray arm design. The arm is equipped with multiple spray nozzles strategically positioned to ensure that water reaches every corner of your dishware. This design promotes effective water distribution, allowing for thorough cleaning of even heavily soiled items. The precision and coverage provided by the spray arm significantly reduce the need for pre-washing dishes, saving time and water.

The W10315181A is constructed from high-quality materials that ensure durability and long-lasting performance. This robustness is crucial for a component exposed to water, heat, and high-pressure cleaning cycles. By investing in this replacement part, users can feel confident that their dishwasher will maintain peak performance over time, minimizing the chances of repairs or replacements in the future.

Another notable characteristic is the ease of installation. The W10315181A is designed to facilitate a straightforward replacement process. Whether you are a skilled DIYer or a first-time home repairer, the spray arm can be installed without the need for specialized tools. This user-friendly approach allows homeowners to quickly restore their dishwashers to optimal functioning conditions, ensuring minimal disruption to their daily routines.

In addition to its mechanical advantages, the Maytag W10315181A contributes to energy efficiency. With improved water distribution, the dishwasher can operate effectively with less water and energy consumption. This not only helps in reducing utility bills but also supports environmentally friendly practices.

Overall, the Maytag W10315181A spray arm stands out for its advanced design, durability, ease of installation, and energy efficiency. These features work together to ensure that your dishwasher functions effectively, providing you with sparkling clean dishes after every cycle. Whether you are addressing a specific issue with your current dishwasher or simply upgrading to enhance performance, the W10315181A is an excellent choice that embodies the reliability and quality that Maytag is known for.
Top Page Image Contents