Maytag 224 manual Hottest Machines on Icet, This Document Contains Important Information

Page 1

IMI CORNELIUS INC

www.Cornelius.com

Owner / Operator Use and Care Guide “I” SERIES 224 ICE CUBE MACHINE

THE HOTTEST MACHINES ON ICET

IMPORTANT:

TO THE INSTALLER.

It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment is provided with protection against backflow by an air gap as defined in ANSI/ASME A112.1.2-1979; or an approved vacuum breaker or other such method as proved effective by test.

Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed, and maintained according to Federal, State, and Local Codes.

Part No. 630460069OPR

Revision: A

Revised: January 9, 2007

THIS DOCUMENT CONTAINS IMPORTANT INFORMATION

This Manual must be read and understood before installing or operating this equipment

♥ IMI CORNELIUS INC; 2007

PRINTED IN U.S.A

Page 1 Page 2
Image 1
Page 1 Page 2
Contents This Document Contains Important Information Hottest Machines on IcetPage Table of Contents 630460069OPR Safety Information Model and Serial Location General DescriptionSeries Cuber Warranty Coverage WarrantySEMI-ANNUAL Maintenance OWNER’S Recommended MaintenanceCleaning the Exterior Cleaning the CondenserPrep Clean Cleaning the InteriorICE Sanitizing ProceduresBefore Calling for Service TroubleshootingSafety Limit Feature Page IMI Cornelius INC
Top Page Image Contents