Operation
Turning on the Power and Selecting a Weight
The first time you plug the power cord into an outlet, or after there has been
an interruption in power, the display shows “
” At this point, you can select the weight system for the display. You can choose between pounds (LBS) or kilograms (KG). To do so,
1 Press 0 immediately after plugging in your microwave. The display will show:
If the display does not shows “Kg”, you will need to unplug the microwave and then plug it in again in order to change to the weight selection.
2Press 0 repeatedly to select the weight system you wish to use:
kg g oz Lbs. cup
When you have selected the weight system you want to use, press the PAUSE/CANCEL button to end this procedure.
Setting the Clock
1 Press the Clock button. The “ENTER” and “TIME” indicators flash. 2 Use the number buttons to enter the current time. You must press
at least three numbers to set the clock. If the current time is 5:00 enter, 5,0,0.
3When 5 seconds has elapsed, “ENTER” indicator flash and “Cloc” will be displayed.
4Press Clock again. A colon will blink, indicating that the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by pressing the Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear instructions you have entered. It also allows you to pause the oven’s cooking cycle, so that you can check the food.
•To pause the oven during cooking: press Pause/Cancel once. To restart, press Start.
•To stop cooking, erase instructions, and return the oven display to the time of day: press Pause/Cancel twice.
•To correct a mistake you have just entered: press Pause/Cancel once, then
Using the One Minute + Button
This button offers a convenient way to heat food in one minute increments at the High power level.
1 Press the One Minute+ button once for each minute you wish to cook the food. For example, press it twice for two minutes. The time will display, and the oven starts automatically.
Add minutes to a program in progress by pressing the One Minute+ button for each minute you want to add.
Using the Sensor Cook Buttons
By actually sensing the steam that escapes as food heat, this feature automati- cally adjusts the oven’s heating time for various types and amounts of precooked food. All food should be precooked and at refrigerator temperature.
1 Press the Sensor Cook button corresponding to the food you are
cooking (Popcorn, for example). The display shows “ ” and your microwave oven will begin cooking automatically.
When cooking popcorn, wait at least five minutes between each bag to avoid overheating the glass tray. If you want to check the current time while cook- ing is in progress, press the Clock button.
Sensor Cooking Guide
•Follow the instructions below when sensor cooking different types of food.
Food | Amount | Procedure |
|
|
|
Potatoes | 1 to 6 EA. | Prick each potato several times with fork. |
| (MS840WB/BB/SB/ | Place on turntable in |
| CB, MS1040WB/ | stand |
| BB/SB/CB : | minutes before using again. |
| 1 to 4 EA.) | |
|
| |
|
|
|
Fresh | 1 to 4 cups | Place fresh vegetables in |
Vegetables |
| and add 2 Tbsp of water. Cover with |
|
| microwave safe plastic wrap or lid. (MS1240WB/ |
|
| BB/SB/CB, MS1440WB/BB/SB/CB ; Using the |
|
| glass cover gives the best results.) |
|
| If using plastic wrap be sure to leave a small |
|
| opening near the edge of dish for ventilation. |
|
| Remove vegetable from oven let sit covered |
|
| for 2 minutes, stir or serve. Let oven cool for at |
|
| least 5 minutes before using again. |
|
|
|
Single | 8 to 14 oz. | Remove food from outer wrapping and follow |
Entrees |
| box instructions for covering and standing. Let |
|
| oven cool for at least 5 minutes before using |
|
| again. |
|
|
|
Popcorn | 3.0 ~ 3.5 oz | Use only one |
| 1 package | at a time. Use caution when removing and |
|
| opening hot bag from oven. Let oven cool for |
|
| at least 5 minutes before using again. |
|
|
|
8