Electrical Requirements, Initial SET-UP, Coffee Brewing

ELECTRICAL REQUIREMENTS

CAUTION - The brewer must be disconnected from the power source until specified in Initial Set-Up.

The brewer has an attached cordset and requires 2-wire grounded service rated 120 volts ac, 15 amp, single phase, 60 Hz.

INITIAL SET-UP

CAUTION - The brewer must be disconnected from the power source throughout the initial set-up, except when specified in the instructions.

1.Insert an empty funnel into the funnel rails.

2.Place an empty dispenser under the funnel.

3.Open the flip lid on top of the brewer and pour in three pitchers of tap water. Allow approximately two minutes between pitchers for water to flow into the tank. While the third pitcher of water is entering the tank, the tank will fill to capacity and the excess will flow from the sprayhead, out of the funnel, and into the dispenser. FIG. 1

4.When the flow of water from the funnel stops, connect the brewer to the power source and wait approxi- mately twenty minutes for the water in the tank to heat to the proper temperature. Some water will drip from the funnel during this time; this is due to expansion and should not occur thereafter.

5.Empty the dispenser and replace it under the funnel.

6.Open the flip lid on top of the brewer and pour in one pitcher of tap water.

7.When water has stopped flowing from the funnel let the water in the tank reheat to the proper tempera- ture.

8.Empty the dispenser. The brewer is now ready for use in accordance with the coffee brewing instructions below.

NOTE: The control thermostat will need to be adjusted downward to compensate for high altitudes. Refer to Service Manual for instructions.

COFFEE BREWING

1. Insert a BUNN® filter into the funnel.

2. Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.

3. Slide the funnel into the funnel rails.

4. Place an empty dispenser beneath the funnel. Models with warmers - Turn on lower warmer switch.

5. Open the flip lid on top of the brewer and pour in one pitcher of tap water. FIG. 1

6. When brewing is completed, simply discard the grounds and filter.

P4038.50

FIG. 1 POUR IN WATER ONLY

Page 4	10053.1 101508

VPS specifications

The Bunn VPS is a high-performance coffee brewing system designed for cafes, restaurants, and commercial establishments that require efficiency coupled with exceptional quality. Renowned for its reliability and consistency, the Bunn VPS has become a staple in the beverage industry, offering a variety of features that cater to both operators and coffee lovers.

One of the most notable features of the Bunn VPS is its versatility in brewing. The system is capable of brewing multiple sizes of coffee, from individual servings to larger pots, making it adaptable for different customer demands. With its simple toggle controls, users can easily adjust brew volumes to suit their needs. This flexibility aligns with the trend in the coffee industry where varying customer preferences necessitate equipment that can accommodate these changes seamlessly.

In terms of technology, the Bunn VPS incorporates an advanced brewing system that employs a precise brewing temperature and time control. This technology ensures that each batch of coffee is brewed to perfection, extracting optimal flavor profiles from the coffee beans. The stainless steel tank holds a consistent water temperature, which is critical for maintaining the quality of the brew. Furthermore, the system utilizes a patented spray head that distributes hot water evenly over the coffee grounds, ensuring uniform extraction for a richer, more flavorful cup.

The design of the Bunn VPS is another highlight, built with ease of use and maintenance in mind. Its sleek, stainless steel exterior not only ensures durability but also makes it easy to clean—a crucial factor in maintaining hygiene in commercial settings. Additionally, the VPS comes equipped with a built-in digital timer and an LED display, providing real-time insights into brewing cycles and helping operators maintain optimal brew quality.

Energy efficiency is also a key characteristic of the Bunn VPS. The system is designed to minimize energy consumption while maintaining consistent performance. This feature not only reduces operational costs but also aligns with the growing concern for environmental sustainability within the food service industry.

In summary, the Bunn VPS is an exceptional coffee brewing system that combines versatility, advanced brewing technology, user-friendly design, and energy efficiency. Its ability to produce high-quality coffee consistently makes it ideal for any commercial setting looking to elevate their beverage offerings while maintaining operational efficiency. For those in the coffee business, the Bunn VPS represents a reliable partner in delivering exceptional coffee experiences to customers.