Bunn 2SH service manual User Notices, Electrical Requirements

Page 3

USER NOTICES

Carefully read and follow all notices on the equipment and in this manual. They were written for your protec- tion. All notices are to be kept in good condition. Replace any unreadable or damaged labels.

00986.0000

ELECTRICAL REQUIREMENTS

The stands have an attached cordset and requires 2-wire grounded service rated 100V or 120 volts ac, single phase, 90 watts total for the 1SH, 180 watts total for the 2SH, or 2-wire grounded service rated 220-240 volts ac, single phase, 90 watts total for the 1SH, 180 watts total for the 2SH.

WARNING - The unit must be disconnected from the power source until specified in Initial Set-Up.

Refer to Data Plate on the Housing, and local/national electrical codes to determine circuit requirements.

RED

N

L1

BLK

GREEN

N BLU

230V

L1 BRN

GREEN \YELLOW

220-240 volt ac Models

Note: This electrical service consists of 2 current carrying conductors (L1 and L2) and a separate conductor for earth ground.

Page 3

28342.1 071912

 

Image 3
Contents Stand BUNN-O-MATIC Commercial Product Warranty Electrical Requirements User NoticesCE Requirements Cleaning