Coffee Brewing, Through the chip in the funnel handle

COFFEE BREWING

WITHOUT A SMART FUNNEL AND MHG or DBC GRINDER:

1.Begin each brew cycle with a clean empty brew funnel.

2.Insert a BUNN filter into the funnel.

3.Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.

4.Slide the funnel into the funnel rails of the selected side until it stops.

5.Place an empty server under the funnel.

6.The "ENABLE BREW ON/OFF" switch for the selected side must be ON. Select the desired batch size.

7.Momentarily press and release the assigned BREW button. There may be certain situations in which the brew cycle will not begin when BREW is pressed:

a.SWITCH NOT ON - "ENABLE BREW ON/OFF" switch must be ON.

b.BREW TEMPERATURE TOO LOW - wait until heated, or cancel BREW LOCKOUT option.

c.CHECK FUNNEL - remove funnel, empty previously brewed grounds and replace with fresh.

d.DISABLED - select different brew button or batch size.

8.If none of the above messages are displayed, the display will read NOW BREWING and show the time remain- ing in the brew cycle.

9.Following the brew will be a countdown of drip time DRIPPING which shows the time remaining until the coffee no longer drips from the funnel tip.

10.Carefully remove the brew funnel and discard the grounds and filter only after visible dripping stops.

WITH A SMART FUNNEL AND G9-2T DBC or MHG GRINDER:

1.Select the small batch size on the grinder.

2.Insert a BUNN filter into the funnel.

3.Grind the selected amount of fresh coffee into the Smart Funnel using the G9-2T DBC or MHG with Smart Funnel operation and level the grounds by gently shaking.

4.Slide the funnel into the funnel rails of the selected side. The brewer will read the coffee name and size ground

through the chip in the funnel handle.

NOTE - The brewer will automatically match the brew batch size to the grinder batch size:

GRINDER	BREWER
Small	Half Batch
Medium	Full Batch
Large	*Full Batch

*If BREW is pressed with a large grinder batch, the display will read: INCORRECT GRIND...BATCH SIZE WRONG, and then PRESS BREW TO BREW ANYWAY.

5.Place an empty server under the funnel.

6.The "ENABLE BREW ON/OFF" switch for the selected side must be ON.

7.Momentarily press and release the assigned BREW button. There may be certain situations in which the brew cycle will not begin when BREW is pressed:

a.SWITCH NOT ON - "ENABLE BREW ON/OFF" switch must be ON.

b.BREW TEMPERATURE TOO LOW - wait until heated or cancel BREW LOCKOUT option.

c.CHECK FUNNEL - remove funnel, empty previously brewed grounds and replace with fresh.

d.INCORRECT GRIND - Indicates a large batch was ground using the grinder. Check batch size.

8.If none of the above messages are displayed, the display will read NOW BREWING and show the time remain- ing in the brew cycle. Arrows will point to the side that is brewing. If both sides are brewing simultaneously, the arrows will alternate from left to right on the display.

9.Following the brew will be a countdown of drip time DRIPPING which shows the time remaining until the coffee no longer drips from the funnel tip.

10.Carefully remove the brew funnel and discard the grounds and filter only after visible dripping stops.

Page 9	41581 120408

ICBB, ICBC, ICBA specifications

Bunn, a leader in commercial brewing equipment, offers a range of versatile and innovative coffee machines designed to meet the diverse needs of coffee businesses. Among their noteworthy offerings are the ICB, ICBA, ICBC, ICBB, and ICB-DV models. Each of these machines features advanced technologies and tailored functionalities that elevate coffee brewing.

The Bunn ICB model is renowned for its intuitive design and user-friendly interface. It incorporates a digital control module, allowing for precise temperature settings and brew time adjustments. The ICB is designed to maintain optimal brewing temperatures, ensuring that every cup of coffee served is consistent in flavor and quality. With its sleek, modern design, it fits seamlessly into various service environments, from bustling cafes to quiet offices.

The ICBA model takes things a step further with its adjustable airflow system, which enhances brewing efficiency. This model is equipped with an integrated hot water tank that provides brewing and dispensing capabilities simultaneously. The ICBA is designed for high-volume coffee service, making it ideal for institutions such as hospitals and universities where demand is constant.

Bunn's ICBC model features programmable batch brewing with variable batch sizes, allowing businesses to customize their coffee output based on peak hours. It also boasts a pre-infusion feature that promotes a more balanced extraction. The ICBC's easy-to-read display offers real-time feedback and alerts for maintenance, ensuring that the machine operates optimally.

The ICBB model is built for versatility and accommodates multiple brew styles. This model comes with interchangeable brew baskets, enabling users to brew different types of coffee or even tea. Its energy-saving capabilities and automatic shut-off features make it an environmentally friendly choice for eco-conscious coffee shops.

Finally, the ICB-DV, known for its dual voltage capability, provides flexibility in installation. This feature makes it a great option for businesses looking to optimize their setup without compromising on performance. With precise temperature controls and excellent brew quality, the ICB-DV is perfect for both high-demand settings and intimate cafés.

Each Bunn coffee machine is built with quality materials and advanced brewing technologies, making them reliable partners in delivering exceptional coffee experiences. Whether enhancing a customer’s morning routine or fueling an energetic work environment, the range of Bunn ICB models combines innovation with craftsmanship to meet the evolving needs of the coffee industry.