TROUBLESHOOTING
problem | suggestions |
|
|
Brewer does not | • Make sure brewer is plugged into a working outlet. |
turn on | • Press the On/Off button to begin brew (red light will be illuminated). |
Coffee is not brewing
•Make sure brewer is plugged into a working outlet.
•Make sure brewer is filled with water. A minimum of 4 cups (20 oz.) is needed to begin brewing.
•Make sure brewer clock is set.
•Press the On/Off button to begin brew (red light will be illuminated).
•Check to see if
Brew time is • Check sprayhead holes for debris. Clean sprayhead and perform longer than usual deep cleaning. See Deep Cleaning instructions (page 6).
Brew funnel overflows
•Be sure filter basket is properly inserted.
•Use BUNN paper filters – they are taller to prevent overflow.
•Be sure sprayhead is in place.
•If overflow continues, contact BUNN for a flow restrictor sprayhead.
Warmer plate • Warmer plate automatically shuts off after 2 hours. To shut off
stays on after manually, push the On/Off button (red light will turn off). brewing phase
Programmed Auto-Start did not work
•Make sure AM/PM was accurately selected.
•Reprogram for Daylight Savings Time or a power outage if needed.
•Make sure
Digital display • Perform deep cleaning. See Deep Cleaning instructions (page 6). flashes between
time and ‘CLE’
Rumbling noise • Normal while water is heating.
•Will occur if you pour fresh water into unit immediately after brewing.
•Will occur if you pour fresh water into unit when the warmer is still on from previous brew.
AUTHORIZED SERVICE
www.bunn.com
in the united states:
1400 Stevenson Drive, Springfield, IL 62703
900 E. Townline Rd., Creston, Iowa 50801
in canada:
280 Industrial Parkway S., Aurora, Ontario L4G 3T9
To receive full assistance, have the Model and Date Code ready when calling.
79