Initial Setup, Temperature Selection | Bunn DUAL068000 specification

INITIAL SETUP

CAUTION: The brewer must be disconnected from the power source throughout the initial setup, except when

specified in the instructions.
1.	Insert an empty funnel into the funnel rails of one of the
1.	Insert an empty funnel into the funnel rails of one of the
	brew stations.
	brew stations.
2.	Place an empty server under the funnel.


3.	Connect the brewer to the power source. Main ON/OFF
	Switch (located in bottom cover behind right front leg on
	Switch (located in bottom cover behind right front leg on
	some brewers) must be in the ON position. Water will begin	°	°	°	°
	flowing into the tank and stop when the tank is filled to its	°	°	°	°

	capacity. Display will show PLEASE WAIT...TANK FILLING
	until tank is filled with water.
4.	Wait approximately twenty minutes for the water in the
	tank to heat to the proper temperature. Display will show
	READY TO BREW...WATER TEMP: XXX˚ when tank is at
	operating temperature.

NOTE: Brew water temperature is factory set at 200° F

(93.3° C). Refer to TEMPERATURE SELECTION below

should the water temperature need to be increased or decreased. When brew water temperature is changed, ready temperature should be increased or decreased ac- cordingly. 5. Place a small vessel beneath the faucet and open the faucet handle. Release it when you hear the tank refilling.

6. Water volumes have been preset at the factory. Refer to adjustments for the Set Brew Volumes section of the Programming Manual on the Bunn-O-Matic website, at

www.bunn.com should the volume need to be increased or decreased.

7. The brewer is now ready for use in accordance with the coffee brewing instructions.

TEMPERATURE SELECTION

SET TEMP - Range: 185˚F (85˚C) to 205˚F (96˚C)

This function allows the operator to set the brew water temperature in the tank. It also sets the hot water faucet dispense temperature.

SET TEMP: XXX° (-) DONE (+)

Procedure to set brew temperature:

1.Press and hold upper right hidden switch until the display reads SELECT RECIPE. Release switch. Continue to press and release switch until the display reads SET TEMP.

2.To adjust the brew temperature, press (-)to decrease or (+) to increase the brew temperature.

3.When finished, press and release DONE to save the new setting, exit the SET TEMP function and advance to the next function screen, SET READY. Another alternative is to press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the SET TEMP function and return to the MAIN

SCREEN.

Page 7	29877.4 031312

DUAL068000 specifications

The Bunn DUAL068000 is an advanced commercial coffee maker designed for high-volume environments where speed, efficiency, and quality are paramount. This dual-brew coffee maker seamlessly combines performance with innovative technologies to meet the demands of cafes, restaurants, and convenience stores.

One of the standout features of the DUAL068000 is its dual brewing capabilities. It allows for the simultaneous brewing of two different types of coffee. This flexibility is particularly valuable in busy settings where diverse customer preferences must be accommodated. Operators can brew a full pot of drip coffee while simultaneously preparing a specialty coffee drink, optimizing workflow and minimizing wait times.

Equipped with a powerful heating element, this coffee maker can brew a full 12-cup pot in under four minutes. This rapid brewing time ensures that fresh coffee is always available, keeping customers satisfied and coming back for more. The DUAL068000 utilizes a unique hot water faucet that provides water on demand, making it easy to prepare tea or other hot beverages without disruption to the brewing process.

The DUAL068000 incorporates Bunn’s patented brewing technology, which includes temperature control and precision brewing features. The machine maintains consistency in water temperature throughout the brewing cycle, ensuring optimal extraction and rich flavor profiles in every cup. Its adjustable brew time allows operators to customize the strength of their coffee according to specific needs.

In terms of durability, the Bunn DUAL068000 is built to withstand the rigors of commercial use. Made from high-quality stainless steel, it offers a robust design that is both easy to clean and resistant to wear and tear over time. The easy-to-navigate control panel provides intuitive operation, allowing staff to quickly adjust settings without extensive training.

Another key characteristic of this machine is its energy-efficient design. Bunn has incorporated features that minimize energy consumption while maximizing output, making the DUAL068000 an eco-friendly choice for coffee businesses seeking to reduce their carbon footprint.

Overall, the Bunn DUAL068000 coffee maker combines reliability, efficiency, and flexibility, making it an ideal choice for any establishment looking to serve exceptional coffee quickly and efficiently. Its advanced technology and robust build quality position it as a leader in the commercial coffee maker market.