Brew through valve

6.Cool the brewer by pouring a full decanter of fresh, cold water into the top of the brewer. Place decanter on the base plate and close the lid. When water has stopped flowing from the brewer, empty the decanter. Repeat this process and set the decanter aside.

7.Grasp the back of the brewer and turn it upside down over a sink. Most of the water in the tank will flow from the sprayhead tube opening. Some water may flow from the area around the top lid. Continue tipping the brewer until the flow stops.

8.Pour a decanter of water into the top of the brewer. Place the decanter on the base plate; close the lid and wait 3 minutes. Repeat this process with another decanter of water. Water will flow out of the funnel after the second decanter has been poured in. When flow from the funnel has stopped, empty the decanter and pour an additional decanter of water into the brewer. Place the decanter on the base plate and close lid.

9.Replace the sprayhead and funnel. Pour additional decanters of fresh, cold water into the brewer as needed until the water has no vinegar taste.

10.Place decanter on base plate and plug in the brewer. Allow the water in the tank to reach brewing temperature before using (approximately 15 minutes).

	y
d o
i		u
D	?
k	?
k	now
	now

While cleaning your brewer, don’t forget to check your glass decanter handle. If loose, use a standard screwdriver to tighten.

Thermal Carafe Routine Cleaning (BTX model) The carafe may be disassembled for cleaning. Rotate the lid counterclockwise to remove. Occasionally, the brew through valve

should be removed and cleaned. Lift at the edge and pull up. Use a mild, non-abrasive detergent to wash the lid thoroughly paying

particular attention to the passage where the brew through valve is located. After rinsing, replace the brew through valve into the carafe lid. Do not use a scrub pad or other abrasive cleaning device to clean the caraf , as this will scratch the stainless steel surface.

To remove coffee stains from inside the thermal carafe, place a paper filter in the funnel and pour in two teaspoons of Cascade powder dishwasher detergent into the paper filter. Slide funnel onto the rails and open brewer lid. Pour one carafe of cold water into brewer. Position carafe on base plate of brewer and close lid. When brewing cycle has stopped, remove the brew funnel and discard the filter and detergent; rinse funnel thoroughly. Allow carafe to sit for 10-15 minutes. Using a long handled, soft bristled brush, clean inside of carafe as well as the outer rim to remove any coffee stains or debris. Occasionally scrub the carafe pour lip and the area around it, including the lid, with a mild detergent and warm water. Use a soft cloth and scrub hard. When finished, pour out solution into sink and thoroughly rinse carafe and lid with clean water.

38200.0016, Bunn BTX-B specifications

The Bunn BTX-B and NHBX coffee maker models are at the forefront of brewing technology, catering to both commercial and home users who demand exceptional performance and flavor quality. These machines are designed with a focus on delivering a perfect cup of coffee every time, featuring a variety of innovative technologies and characteristics that set them apart.

One of the standout features of the Bunn BTX-B is its patented “brew-assured” design, which ensures that every batch of coffee is brewed at the optimal temperature. This crucial aspect guarantees that the coffee grounds are fully saturated, allowing for maximum extraction and flavor. Additionally, the BTX-B has a unique dual coffee dispenser, facilitating the brewing of two different types of coffee simultaneously. This feature caters to diverse preferences, making it ideal for office environments or households with coffee enthusiasts.

The NHBX model, on the other hand, is tailored for high volume brewing. Its large capacity allows for the brewing of multiple carafes in a short amount of time, without compromising on quality. This makes the NHBX an excellent choice for cafes, restaurants, and catering services. The machine is equipped with a programmable brew timer, providing users with the flexibility to schedule brewing times in advance, ensuring that fresh coffee is always ready when needed.

Both models are outfitted with Bunn's innovative hot water tank technology, which keeps water at a consistent temperature. This feature minimizes waiting times while ensuring that your coffee is brewed quickly and efficiently. The stainless steel construction of these machines offers durability and an appealing, modern aesthetic, while also being easy to clean and maintain.

The Bunn BTX-B and NHBX incorporate advanced safety features, including an automatic shut-off mechanism to prevent overheating. This ensures peace of mind for users who might be concerned about leaving the machine unattended while brewing.

In terms of usability, these coffee makers come with user-friendly controls and a clear water reservoir gauge, making it easy to monitor water levels. They also have an ergonomic handle and a drip-free spout, enhancing the overall user experience.

In summary, the Bunn BTX-B and NHBX coffee makers represent a blend of quality, efficiency, and modern technology. With their advanced brewing features, generous capacities, and smart design, they are excellent choices for anyone serious about their coffee, whether at home or in a commercial setting.