Bunn AFPO-3 SL manual Vacuum Switches

Page 21

SERVICE (cont.)

VACUUM SWITCHES

 

 

1

 

 

2

 

3

 

 

1

 

 

1

 

 

2

 

2

3

 

 

 

3

 

 

FIG. 26 VACUUM SWITCHES

P1521

 

Location:

The vacuum switches are located inside autofill box, mounted on the left side of the solenoid mounting bracket just below the needle valves.

Test Procedure:

1.Disconnect the dispenser from the power source.

2.Disconnect flavor input lines.

3.Disconnect white/red, red/black or the brown/black wires on the vacuum switch.

4.Check for continuity across the switch leads.

If continuity is not present as described, the vacuum switch is operating properly.

If continuity is present as described, without a vacuum generated by an empty product concentrate, replace the vacuum switch.

Removal and Replacement:

1.Disconnect dispenser from the power source.

2.Removal of the two #8-32 keps nuts securing the pump/motor assembly nearest the vacuum switches is required to access the lower vacuum switch.

3.Disconnect the input tubes from the vacuum switch to be replaced.

4.Disconnect the wires on the vacuum switch to be removed.

5.Remove the two #4-40 screws securing the vacuum switch to the solenoid bracket. Remove and discard switch.

6.Using two #4-40 screws secure the new vacuum switch to the solenoid bracket.

7.Refer to Fig. 27 and reconnect the wires.

8.Connect the input tubes to the new vacuum switch.

9.Restore the pump/motor assembly to its normal mounting position using the two #8-32 keps nuts.

 

WHI/RED from Refill ON/OFF Switch #3

 

 

WHI/RED to Circuit Board J4-2

 

 

RED/BLK from Refill ON/OFF Switch #1

 

RED/BLK to Circuit Board J4-5

 

#3

#1

 

 

BRN/BLK from Refill ON/OFF Switch #2

 

BRN/BLK to Circuit Board J4-4

 

 

#2

 

 

FIG. 27 VACUUM SWITCH TERMINALS

P1527

 

 

 

21

41093 040408

 

 

Image 21
Contents AFPO-3 SL BUNN-O-MATIC Commercial Product Warranty User Notices MIX Ratio Adjustments Cleaning Recommended Weekly CleaningMIX Ratio ADJUSTMENTScont Refill Circuit ON/OFF Main Power ON/OFFTEST/OPERATE Probe Control BOX LOW/OFF/HIGHProblem Probable Cause Remedy TroubleshootingTroubleshooting Component Access ServiceCircuit Board Circuit BoardLocation Fuse and Fuse HolderMain ON/OFF Switch ServiceProbe System Probe Switches#3 AFPO-3 only Pump Flavor ON/OFF SwitchesRefill Switches Refill SwitchesOnly White wire from the solenoidSolenoid Water ON/OFF Switches Solenoid Water ON/OFF SwitchesTEST/OPERATE Switch VACUUM/SUPPLY Pump Assembly VACUUM/SUPPLY Pump AssemblyTubing Start Position VACUUM/SUPPLY Pump Tube InstallationVacuum Switches Vacuum SwitchesPiping Diagram AFPO-2 Schematic Wiring Diagram AFPO-2 41093 Schematic Wiring Diagram AFPOA-2
Related manuals
Manual 25 pages 230 b Manual 8 pages 54.73 Kb

AFPO-3 SL specifications

The Bunn AFPO-2 SL, AFPO-3 SL, and AFPO-3 are advanced coffee brewing systems that cater to the needs of commercial establishments seeking efficiency and high-quality coffee production. These machines are designed for ease of use, high throughput, and flexibility, making them ideal for coffee shops, restaurants, and workplaces.

The Bunn AFPO-2 SL is known for its dual-brew capabilities, allowing users to brew coffee and tea simultaneously. This model features a sleek, stainless-steel design that fits well in various settings. It comes equipped with an electronic controls interface that ensures precise brewing temperatures and times, enabling baristas to consistently produce flavorful coffee. The AFPO-2 SL has a brewing capacity of up to 3.8 gallons per hour, making it suitable for high-demand environments.

Another standout model is the Bunn AFPO-3 SL, which builds upon the features of the AFPO-2 SL with an increased brewing capacity of up to 4.5 gallons per hour. This model includes a programmable digital control module, which allows users to customize brew cycles for different coffee blends, enhancing versatility. The AFPO-3 SL is designed with stainless-steel construction, ensuring durability and longevity while maintaining easy cleaning and maintenance routines.

The hallmark of the Bunn AFPO-3 is its single-serve capability, which provides a fresh-brewed experience for every cup. With advanced technology that ensures optimal water temperature and flow rate, the AFPO-3 guarantees rich and robust flavors in every pour. This model is ideal for establishments that want to offer their customers a variety of coffee options without sacrificing quality or speed. It also features an intuitive user interface, allowing staff to operate the machine with minimal training.

All three models are equipped with a built-in hot water tap, providing instant access to hot water for tea or other beverages, further increasing their utility in busy environments. The Bunn AFPO series is known for its reliability, with heavy-duty components that withstand the rigors of daily use.

In summary, the Bunn AFPO-2 SL, AFPO-3 SL, and AFPO-3 represent the pinnacle of brewing technology in the commercial coffee market. With their advanced brewing capabilities, user-friendly designs, and robust construction, these machines are perfectly suited for any establishment that values quality coffee and operational efficiency.