Modes of Operation, Error Messages | Aube Technologies TH115

6.3Floor Temperature Limits (AF mode only)

NOTE: To avoid damaging your floor, follow your floor supplier’s recom- mendations regarding floor temperature limits.

The minimum and maximum floor temperature limits are 5 °C (41 °F) and

28 °C (82 °F) by default. To modify these limits, proceed as follows:

nSwitch the thermostat to Standby.

o Press and hold the button. p Switch the thermostat back to On.

qRelease the button when the minimum temperature limit (FL:LO) appears.

r Set the minimum temperature limit using the buttons.

s Press the button to display the maximum temperature limit (FL:HI).

tSet the maximum temperature limit using the buttons. u Press Mode/Ret to exit.

tModes of Operation

The thermostat has 3 modes of operation.

7.1 Automatic Mode

The thermostat follows the programmed schedule. To place the ther- mostat in this mode, press Mode/Ret until is displayed. The data of the current schedule period are also displayed.

Temporary Bypass

If you modify the setpoint temperature (by pressing the , or button) when the thermostat is in automatic mode, the new tempera- ture will be used until the beginning of the next period. flashes dur- ing the bypass. You can cancel the bypass by pressing Mode/Ret.

Programmed Schedule

The schedule consists of 4 periods per day which represents a typi- cal week day. You can program the thermostat to skip the periods that do not apply to your situation. For example, you can skip periods 2 and 3 for the weekend.

Period

Description

Associated temperature setting

Wake-up

Away from home

Return home

Sleep

The Comfort ( ) temperature is used in periods 1 and 3 and the

Economy ( ) temperature is used in periods 2 and 4. For example, when the period changes from 1 to 2, the setpoint automatically changes from Comfort ( ) temperature to Economy () temperature.

You can have a different program for each day of the week; i.e., each period can start at different time for each day of the week. The thermostat has been programmed with the following schedule.

Period Setting	MO	TU	WE	TH	FR	SA	SU
	6:00	6:00	6:00	6:00	6:00	6:00	6:00
	8:30	8:30	8:30	8:30	8:30	--:--	--:--
	17:00 17:00 17:00 17:00 17:00					--:--	--:--
	23:00	23:00	23:00	23:00	23:00	23:00	23:00

To modify the schedule:

nPress Pgm to access the programming mode. Period 1 is selected.

oPress Day to select the day to program (hold for 3 seconds to select the entire week).

pPress Hour and Min to set the start time of the selected period, or press Clear if you want to skip the period (--:-- is displayed). NOTE: If you intend to use only 2 periods, set periods “1 and 4” or periods “2 and 3”. Early Start will not work if you set periods “1 and 2” or periods “3 and 4” .

qPress Pgm to select another period, or press Day to select another day. Then repeat step 3.

rPress Mode/Ret to exit the programming mode.

NOTE: If no button is pressed for 60 seconds, the thermostat will automatically exit the programming mode.

7.2 Manual Mode

The programmed schedule is not used. The temperature must be set manually. To place the thermostat in this mode:

nPress Mode/Ret until is displayed.

oSet the temperature using the , or button.

7.3 Vacation Mode

In this mode, the thermostat is set to Vacation temperature. There are two ways to place the thermostat in Vacation mode:

By pressing the button on the thermostat. When the Vacation

mode is activated using the button, the icon appears on the screen without flashing.

From an Aube telephone controller (CT240/CT241) or any other remote control device equipped with a dry contact if your power base is equipped with the ECONO input. When the contact

closes, the Vacation mode is activated and the icon flashes on the screen. All buttons on the thermostat are locked. When the contact opens, the thermostat returns to the preceding mode.

NOTE: When the Vacation mode is activated using a remote control device, it can only be deactivated using the device.

uError Messages

The measured temperature is below the thermostat’s display range. Heating is activated.

The measured temperature is above the thermostat’s display range. Heating is deactivated.

Verify the thermostat and sensor connections.

vTechnical Specifications

Power supply: Refer to the power base’s installation guide.

Display range: 0 °C to 70 °C (32 °F to 158 °F)

Ambient setpoint range (A/AF modes): 5 °C to 30 °C (40 °F - 86 °F)

Floor setpoint range (F mode): 5 °C to 40 °C (40 °F - 104 °F)

Floor limit range (AF mode): 5 °C to 40 °C (40 °F - 104 °F)

Display resolution: 0.5 °C (1 °F)

Operating temperature: 0 °C to 50 °C (32 °F to 120 °F)

Storage temperature: -20 °C to 50 °C (-4 °F to 120 °F)

Heating cycle length: Refer to the power base’s installation guide

Data backup: In the event of a power failure, most settings are saved. Only the time must be re-adjusted if the power failure lasts more than 6 hours. The thermostat will return to the mode that was active prior to the power failure.

;Warranty

Aube warrants this product, excluding battery, to be free from defects in the work- manship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Aube shall repair or replace it (at Aube's option).

If the product is defective,

(i)return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or

(ii)contact Aube. Aube will make the determination whether the product should be returned, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Aube that the defect or malfunction was caused by dam- age which occurred while the product was in the possession of a consumer.

Aube's sole responsibility shall be to repair or replace the product within the terms stated above. AUBE SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR- RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PROD- UCT. Some provinces, states or regions do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE THREE-YEAR DURATION OF THIS WARRANTY. Some provinces, states or regions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which vary from province, state or region to another.

Customer Assistance

For any questions regarding product installation or operation, contact us at:

705 Montrichard Saint-Jean-sur-Richelieu, Quebec J2X 5K8

Canada

Tel.: (450) 358-4600

Toll-free: 1-800-831-AUBE

Fax: (450) 358-4650

E-mail: aube.service@honeywell.com

For more information on our products, visit us at:

www.aubetech.com

TH115 A/F/AF

400-115-003-B

27/2/07

2/2

TH115 specifications

Aube Technologies TH115 is a state-of-the-art digital thermostat designed specifically for electric heating systems. With its sleek and modern design, the TH115 seamlessly integrates into any home setting, providing efficient and user-friendly temperature control. This device is ideal for homeowners seeking a reliable solution for managing their heating, ensuring comfort while maintaining energy efficiency.

One of the standout features of the TH115 is its intuitive interface, which includes a large, backlit display. This allows users to easily read and adjust the settings, even in low-light conditions. The thermostat offers a straightforward programming system, allowing users to set customized schedules for heating based on their daily routines. With the ability to create specific timeframes for weekdays and weekends, users can significantly enhance their comfort while optimizing energy use.

The TH115 employs advanced technologies to ensure precise temperature management. It includes an adaptive ramp-up feature that allows the thermostat to adjust the heating gradually, preventing abrupt temperature changes and enhancing overall comfort. The device also utilizes a built-in temperature sensor that monitors the ambient temperature continuously, allowing for real-time adjustments to maintain the desired comfort level.

Another notable characteristic of the TH115 is its energy-saving capabilities. The thermostat is designed to minimize energy consumption by automatically switching to an energy-saving mode when occupants are away, reducing unnecessary heating costs. Additionally, users can take advantage of the unit's vacation mode, which allows them to set a lower temperature during extended absences, further contributing to energy savings.

The TH115 is compatible with various electric heating systems, including baseboard heaters and radiant floor heating. This versatility makes it suitable for a wide range of installations, allowing users to benefit from its features regardless of their specific heating setup. Furthermore, the thermostat is easy to install, making it accessible even for those with minimal technical knowledge.

In conclusion, the Aube Technologies TH115 digital thermostat offers a combination of advanced features, user-friendly design, and energy efficiency, making it an excellent choice for homeowners looking to optimize their heating systems. Its programmable settings, adaptive features, and compatibility with various electric heating solutions distinguish it in the market, ensuring that users can enjoy a comfortable living environment while also reducing their energy footprint.