Extron electronic DVI 201 Tx, DVI 201 Rx user manual Reference Information, Specifications

Page 26

Reference Information

Specifications

N*Appropriate DVI-D to HDMI cables or adapters are required for

HDMI signal input/output.

Also, an optional Extron HDMI-to-DVI adapter is required in order to transmit a CEC signal.

Video

Maximum data rate

4.95 Gbps (1.65 Gbps per color)

Maximum pixel clock

165 MHz

Resolution range

1920x1200 or 1080p @ 60 Hz

Formats

RGB and YCbCr digital video

Standards

DVI 1.0, HDMI 1.2

Video input and loop through— transmitters

Number/signal type

1 single link DVI-D (or HDMI*) input

 

1 single link DVI-D (or HDMI*) local loop-

 

through

Connectors

 

DVI 201 Tx/Rx

2 female DVI-D

DVI 201 A D Tx/Rx

2 female DVI-I

Interconnection between transmitter and receiver

Connectors

(2) RJ-45 per unit for 2 CAT 5/5e/6/7

 

UTP (unshielded twisted parir) or STP

 

(shielded twisted pair) cables connecting

 

the transmitter and receiver

Termination standards

TIA/EIA T568A or T568B. Pin

 

configurations for each standard are

 

available in the manual's installation

 

chapter.

Signal transmission distance

 

1900x1200 or 1080p @ 60 Hz

CAT 5/5e/6/7 STP ... Up to 125' (38 m) CAT 5/5e/6/7 UTP .. Up to 100' (30 m)

1024x768 or 720p/1080i @ 60 Hz

CAT 5/5e/6/7 UTP or STP

Up to 200' (60 m)

NThe transmission distance varies greatly depending on the signal resolution and on the type of cable, graphic card, and display used in the system.

Video output— receivers

Number/signal type

1 single link DVI-D (or HDMI*)

Connectors

 

DVI 201 Tx/Rx

2 female DVI-D

DVI 201 A D Tx/Rx

2 female DVI-I

Audio— DVI 201 A D Tx/Rx

Gain

Unbalanced output: 0 dB;

 

balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.10% @ 1 kHz at nominal level

S/N

>85 dB at maximum output (unweighted)

Stereo channel separation

>86 dB @ 1 kHz

Audio input— DVI 201 A D Tx/Rx

Number/signal type

 

DVI 201 A D Tx

1 stereo, unbalanced

DVI 201 A D Rx

1 stereo, balanced/unbalanced

Connectors

 

DVI 201 A D Tx

(1) 3.5 mm mini audio jack (tip, ring, sleeve)

DVI 201 A D Rx

(1) 3.5 mm captive screw connector, 5 pole

Impedance

 

DVI 201 A D Tx

>10k ohms unbalanced, DC coupled

DVI 201 A D Rx

>18k ohms unbalanced, 14k ohms

 

balanced, DC coupled

Nominal level

 

DVI 201 A D Tx

-10 dBV (316 mVrms)

DVI 201 A D Rx

+4 dBu (1.23 Vrms)

Maximum level

 

DVI 201 A D Tx

+11 dBu, unbalanced at 1% THD+N

DVI 201 A D Rx

+16.8 dBu, unbalanced at 1% THD+N

N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio output— DVI 201 A D Tx/Rx

Number/signal type

 

DVI 201 A D Tx

1 stereo, balanced/unbalanced

DVI 201 A D Rx

1 stereo, unbalanced

Connectors

 

DVI 201 A D Tx

(1) 3.5 mm captive screw connector, 5 pole

DVI 201 A D Rx

(1) 3.5 mm mini audio jack (tip, ring, sleeve)

A-2

DVI 201 Tx/Rx • Reference Information

DVI 201 Tx/Rx • Reference Information

A-3

Image 26
Contents User’s Manual Digital Video Transmitter and ReceiverPrecautions Extron’s Warranty安全须知 中文 FCC Class a NoticeTable of Contents Table of Contents, cont’d DVI 201 Tx/RxAbout the DVI 201 Transmitters and Receivers IntroductionAbout this Manual TP cable advantages FeaturesIntroduction, cont’d Control communicationsTwo Non-Decora unit mounting Installation and OperationMounting the Tx/Rx Through-furniture mounting Installation and Operation, cont’dUnder-furniture mounting Projector mounting PMK 300 mountingProjector pole on the inside PMK 350 mountingDecora unit mounting UL/Safety RequirementsPreparing the site and installing the wall box Be sure to tighten the hex nuts securely enough that10 Installing the wall box Transmitter connections Final installationConnections Local output DVI 201 Tx non-Decora only If desired Audio input DVI 201 a D Tx Decora only Connect anReceiver connections Receiver input connector Connect one end of the two Audio Input connector DVI 201 a D Rx Decora onlyDVI connector pin assignments Pin assignments and wiringAudio output connector DVI 201 a D Tx Decora only Pin SignalYou must supply the CAT 5, 5e, or 6 STP cable Power supply wiringTerminating shielded cable RS-232 connector wiring OperationPower LED Transmitter control and indicatorReceiver indicator DDC Route switch DVI 201 Tx non-Decora onlyTroubleshooting Installation and Operation, cont’d Application Examples Audio conversionAAppendix a Specifications Reference InformationGeneral Reference Information, cont’dControl/remote external device pass-through Transmitter/receiver pair part numbers Mounting accessoriesReference Information, cont’d Part Numbers Included partsAdapters Decora Template DimensionsCables Reference Information, cont’d

DVI 201 Tx, DVI 201 Rx specifications

Extron Electronics is known for its innovative solutions in the field of professional AV signal distribution and extension. Among its robust product lineup are the DVI 201 Rx and DVI 201 Tx devices, which are essential for transmitting and receiving digital video signals with exceptional performance and reliability.

The Extron DVI 201 Tx is a DVI transmitter that seamlessly converts DVI signals to a format suitable for long-distance transmission. It features a DVI connector for input and utilizes advanced technologies to ensure minimal signal degradation. The DVI 201 Tx supports high-resolution video up to 1920x1200 at 60 Hz, making it ideal for high-definition applications, including presentations, video conferencing, and digital signage.

On the receiving end, the DVI 201 Rx is designed to receive the transmitted DVI signals and convert them back into a format ready for display. This device also supports resolutions up to 1920x1200 at 60 Hz, ensuring that users can enjoy crystal-clear image quality without loss of detail. The DVI 201 Rx features a straightforward installation process, allowing for plug-and-play functionality that reduces setup time and complexity.

Both the DVI 201 Tx and DVI 201 Rx employ Extron’s patented technology for signal integrity, which includes the use of equalization and error correction to maintain the reliability of the transmitted signals over longer distances. This aspect is crucial for installations that may involve several hundred feet of cabling, where conventional methods could lead to signal loss or corruption.

One of the key characteristics of both the DVI 201 Tx and DVI 201 Rx is their compatibility with a wide range of DVI-enabled devices. This versatility is particularly beneficial in diverse installation environments, such as corporate offices, classrooms, and control rooms, where different types of hardware may be in use.

Furthermore, both devices are designed with a compact form factor, allowing for easy placement in various setups, whether they are rack-mounted or positioned directly next to display devices. The robust construction and durable components ensure longevity and consistent performance over time, meeting the demands of professionals in the AV industry.

In summary, the Extron DVI 201 Rx and DVI 201 Tx are streamlined solutions for digital video signal transmission, showcasing innovative technology, high resolution support, and dependable performance, making them the preferred choice for AV professionals seeking quality and reliability.