Introduction, Control Elements and Connections

ULTRABASS BB810

1. INTRODUCTION

Thank you for expressing your confidence in our products by purchasing the BEHRINGER ULTRABASS BB810. This cabinet is built with the outstanding BUGERATM bass speakers. The speaker cones are made of special high-quality paper that provide rich bass tone and clear middle frequencies.

Bass players, who love the warm and direct sound of a classic paper cone, will appreciate the high quality and workmanship as well as the extremely high power output of these speakers. All these characteristics make your ULTRABASS BB810 a high- value, dependable companion on the stage, in the studio or in your practice room.

1.1 Shipment

The BB810 was carefully packed at the assembly plant to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage.

+Damaged equipment should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery. Otherwise, all claims for replacement/repair may be rendered invalid.

+Always use the original packing carton to prevent damage during storage or transport.

+Never let unsupervised children play with the ULTRABASS or with its packaging.

+Please dispose of all packaging materials in an environmentally friendly fashion.

1.2 Initial operation

Connect the ULTRABASS BB810 to a power amplifier using the speaker connectors located in the back.

+Please make sure to completely lower the volume on your amp before connecting it to the BB810.

1.3 Warranty

Please take a few minutes and send us the completed warranty card within 14 days of the date of purchase. You may also register online at www.behringer.com. The serial number needed for the registration is located in the back of the unit. Failure to register your product may void future warranty claims.

2.CONTROL ELEMENTS AND CONNECTIONS

Fig. 2.1.: Control elements and connections

You can connect a footswitch (e.g. MIDI FOOT CONTROLLER FCB1010) to this 1/4" TS connector to remotely enable/disable the tweeter. When the tweeter is enabled, you get a harder, more direct sound (Hard Attack). When the tweeter is disabled, the entire sound spectrum is reproduced only on the bass speakers (Soft Attack).

The loudspeakers of the ULTRABASS series feature a 1/4" TS connector in the INPUT/LINK section as well as two professional speaker connectors (compatible with NEUTRIK® SPEAKON®). All connectors are wired in parallel, which means that all three connections are identical in their function. Therefore, you can connect a second speaker to the link connector output without going directly to the amplifier. This way, you can utilize short cables and will require no additional connectors on your amp.

+Connecting several ULTRABASS cabinets via the link connector reduces the input impedance: if you connect two identical speakers, the impedance is reduced to one half of the original value, with three speakers to a third, and so on. Therefore, always keep in mind the impedance value of your amplifier to avoid causing damage by overloading. Ideally, the impedance of your speakers corresponds to the impedance of your amplifier. If the speaker has a higher impedance than the amplifier, this will have no negative consequences on the amp, but it won’t be able to pass its full power to the speaker. See chapter 4. “INSTALLATION” for more information.

+Attention! Never connect two amps to one BB810. Otherwise, you may destroy both your amps and your speakers.

This table shows the correct polarity of the connectors:

Plus pole (POS) = Tip (TIP) on the 1/4" TS connector or 1+ on the professional speaker connector.

Minus pole (NEG) = Sleeve (SLV) on the 1/4" TS connector or 1- on the professional speaker connector.

+Please observe the illustrations 4.1 and 4.2.

SERIAL NUMBER. Please take a few minutes and send us the completed warranty card within 14 days of the date of purchase; failure to do so may void future warranty claims. You may also register online at www.behringer.com.

2. CONTROL ELEMENTS AND CONNECTIONS

BB810 specifications

The Behringer BB810 is an innovative bass amplifier that caters to the needs of modern bassists looking for powerful performance and versatility. Combining solid build quality with a range of features, this amplifier is designed to deliver exceptional sound in a variety of settings, from rehearsals to live performances.

One of the standout features of the BB810 is its impressive power output. With 800 watts of power, it can easily handle large venues, ensuring that bass frequencies are projected clearly without distortion. The amplifier is equipped with a robust 10-inch speaker system, which provides a deep, resonant low-end while maintaining clarity in mids and highs. This configuration not only enhances low-frequency response but also allows for a wider tonal range, making it ideal for various music styles, including rock, jazz, and funk.

The BB810 boasts an intuitive control panel that allows for easy manipulation of sound settings. Key components include a built-in equalizer with multiple frequency bands, enabling players to sculpt their tone precisely to their preferences. Additionally, the amplifier incorporates a compressor that can prevent signal clipping, ensuring a smooth performance even during high-energy play.

Modern connectivity features set the BB810 apart, offering both XLR direct outputs and a 1/4-inch input for added compatibility with various setups. This allows bassists to connect directly to mixing consoles or stage monitors, making it a versatile option for both studio and live situations. Furthermore, the inclusion of effects loops provides the capability to integrate pedals and external processors seamlessly.

Durability is another hallmark of the BB810, as it is built with a rugged enclosure designed to withstand the rigors of touring musicians. The high-quality components ensure reliability, allowing players to focus on their performance without worrying about their gear.

In summary, the Behringer BB810 combines power, flexibility, and durability in a single package, making it a valuable addition to any bassist's setup. With its impressive wattage, advanced tone-shaping capabilities, and robust construction, this amplifier meets the demands of both practice and performance, offering musicians the tools they need to achieve their ideal sound. Whether on stage or in the studio, the BB810 stands out as a top choice for serious bassists.