CDA HCN610 manual Timer

Page 5

Using your Hob

Please note:

•A dot will show on either the zone control display or the timer display to demonstrate which is the active control. To select a different control, touch either the required zone control key or the timer key.

To switch the zone on

•Touch the zone control key for the required zone. The zone control display will flash with 0 and for the relevant zone and the hob will beep to confirm the zone is on.

To set the power level

•Touch the + key to increase the power level from 1 (lowest) to P (maximum) and the – key to reduce it.

•To go straight to P, touch the – key once when the zone is switched on.

Please note:

•If a power level is not set within five seconds, the zone will switch off automatically.

To switch the zone off

•Touch and hold the zone control key for the required zone until the display switches off.

The timer

•The timer allows you to preset the length of time any of the zones will be on, between a minimum of one minute and a maximum of ninety-nine minutes. The timer can be used on each zone separately.

To set the timer

•First switch on the zone and set the power level.

•Touch the timer key repeatedly until the LED in the timer display is lit for the required zone.

•Then touch the + and – keys until the timer display shows the required duration.

•To go straight to the maximum 99 minutes, touch the – key once when the timer is switched on.

Please note:

•The timer will only count down when the cookware is on the zone.

•The timer will count down in minutes, and then in seconds for the last minute.

•At the end of the set time, the zone will switch off, the timer display will flash 0 and the hob will beep for approximately 20 seconds. To stop the beep, touch any key.

To change the timer once set

•Touch the timer key repeatedly until the LED is lit for the required zone.

•Then touch the + and – keys until the display shows the required duration.

To cancel the timer once set

•Touch the timer key repeatedly until the LED is lit for the required zone.

•Then touch and hold the + and – keys simultaneously for approximately three seconds. This will cancel the timer.

Please note:

•If you cancel the timer, the zone will continue at the set power level until it switched off as described above.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HCN610 Induction Hob Please note Appliance informationCE Declarations of Conformity For Those with Heart Pacemakers or Active Implants Cooking on InductionControl panel Using your HobZones Timer Temperature Limiters Residual Heat IndicatorsSmall Object Safety ChildlockZone Size Minimum Pan Size cm Maximum Pan Size cm Efficient Use of your HobContact CDA Customer Care Care and MaintenanceIf yor Hob is not working On first use TroubleshootingYou observe that Possible Causes UseFitting the Hob How to install the hob Mains Electricity Connection Page Page Page Customer Care Department 01949 862

HCN610 specifications

The CDA HCN610 is an innovative and versatile 60cm dual fuel cooker designed to meet the needs of modern kitchens while delivering exceptional performance. This appliance combines the benefits of both gas and electric cooking, allowing users to enjoy the control of gas burners paired with the even heating of an electric oven.

One of the standout features of the CDA HCN610 is its dual fuel system, which provides the best of both worlds. The four powerful gas burners come in various sizes, accommodating pots and pans of different dimensions, while the electric oven offers precise temperature control for consistent baking results. The hob features a cast iron griddle pan, which is perfect for grilling meats and vegetables, enhancing the cooking experience with deliciously charred flavours.

The CDA HCN610 also includes a 65-litre oven capacity, making it ideal for cooking for large families or entertaining guests. The oven boasts a conventional cooking function as well as a fan-assisted setting, ensuring that food is cooked evenly and thoroughly. Additionally, the appliance features a built-in grill, which is perfect for crisping up dishes or making quick snacks.

One of the key technologies employed in the CDA HCN610 is the easy-clean enamel lining. This special coating makes it easy to wipe down the oven after use, reducing cooking time cleanup efforts significantly. Furthermore, the cooker's flame failure safety device provides peace of mind, ensuring that gas flow is automatically cut off if the flame goes out unexpectedly.

The sleek stainless-steel finish of the CDA HCN610 not only adds a contemporary touch to any kitchen but also improves durability and resistance to stains and scratches. The cooker is designed with intuitive control knobs, enabling users to adjust heat settings easily, ensuring that cooking is always accurate and intuitive.

Energy efficiency is another important consideration, and the CDA HCN610 is designed with this in mind. The oven features an A energy rating, which means it consumes less energy while delivering consistently high performance. This makes the CDA HCN610 an environmentally-friendly choice for conscientious consumers.

In summary, the CDA HCN610 is a feature-rich dual fuel cooker that brings together convenience, safety, and modern technology, making it an excellent addition to any culinary space. With its powerful cooking capabilities, easy maintenance, and sleek design, it is sure to satisfy both seasoned chefs and home cooks alike.
Top Page Image Contents