CDA MV440 manual Doneness, +/- buttons right after you have pressed the Start button

DONENESS (AUTO FUNCTIONS ONLY)

DONENESS IS AVAILABLE in most of the auto func- tions. You have the possibility to personal- ly control the end result through the Adjust doneness feature. This feature enables you to achieve higher or lower end temperature com- pared to the default standard setting.

WHEN USING one of these functions the oven chooses the default standard setting. This set- ting normally gives you the best result. But if the food you heated became too warm to eat at once, you can easily adjust this before you use that function the next time.

DONENESS

LEVEL EFFECT

HIGH +2 YIELDS HIGHEST END TEMPERATURE

HIGH +1 YIELDS HIGHER END TEMPERATURE

MED 0 DEFAULT STANDARD SETTING

LOW -1 YIELDS LOWER END TEMPERATURE

LOW -2 YIELDS LOWEST END TEMPERATURE

NOTE:

THE DONENESS can only be set or altered during the first 20 seconds of operation.

THIS IS DONE BY SELECTING A DONENESS LEVEL with the

+/- buttons right after you have pressed the Start button.

STIR OR TURN FOOD (AUTO FUNCTIONS ONLY)

WHEN USING SOME OF THE AUTOO FUFUNCTIONSNCTIONS thethe ovenoven

may stop (depending on the chosen program and food class) and prompt you to STIR FOOD or TURN FOOD.

T￿O CONTINUE COOKING:

￿Stir or turn the food.

￿Close the door and restart by pressing the Start button.Open the door.

NOTE: THE OVEN CONTINUES AUTOMATICALLY AFTER 1

MIN. if the food hasn’t been turned / stirred. The heating time will be longer in this case.

6