CDA FW281 Installing under a worktop, Adjusting the plinth depth figure, Adjusting the decor door

Page 10

Installing under a worktop

Adjust the feet to the required height.

Push the appliance into the niche until the decor door is flush with the adjacent furniture items, adjust the feet if necessary.

Pre-adjust the appliance at slots (4) as shown in figure 8, into the mounting plate on the worktop.

Adjusting the plinth depth (figure 6)

Lift out the decor door.

Grip the plinth at the ventilation grille and align until flush with adjacent furniture items, or join up to the continuous plinth if fitted. Cut away the continuous plinth trim as illustrated for ventilation.

Never cover over the ventilation slots.

Once installed the plinth must not block the ventilation slots in the appliance. This may require cutting the plinth down. Failure to ensure adequate ventilation may invalidate the warranty.

Attach the appliance plinth at screws (5),

turning screws clockwise until considerable resistance is felt (figure 7).

To adjust the plinth height, turn the screws anti-clockwise through approximately 8 to 10 revolutions.

Adjusting the decor door

Position the decor door on the appliance. Open loose locking nuts.

Adjust height Y at locating pin (14mm wrench) as shown in figure 8, Y=max +/- 3.5mm.

Adjust side measurement X at slots on mounting bracket at top, X=max, +/- 3mm.

Open out lower locating pins until contact is made with the mounting plate. Secure with locking nuts.

If necessary, adjust the alignment of the lower decor panel edge at 10x12 hole in mounting bracket, Z= +/- 2MM. Then tighten the locking nuts again.

Push on cover trim (6) and engage (to remove, lever out the trim strip with a screwdriver as illustrated in figure 9).

When aligned, secure the appliance to the worktop at retaining slots.

Important: The cover trim (6) must be fitted as this turns off the light when the door is closed.

fig. 6

5

fig. 7

fig. 8

fig. 9

Image 10
Contents FW281 integrated under counter freezer Appliance information CE Declarations of ConformityBefore first use Controls and Use Defrosting the freezer Care and cleaningDo not use heaters or defrosting sprays in this appliance Appliance is working, but not very well TroubleshootingIf the appliance is not working Appliance is noisyInstallation Dimensions of the applianceReversing the door Do not turn the door upside downInstalling the decor door Adjusting the decor door Installing under a worktopAdjusting the plinth depth figure Never cover over the ventilation slotsElectrical information Customer Care Department 01949 862

FW281 specifications

CDA FW281 is a premium built-in microwave that combines functionality with a sleek, modern design, making it an essential addition to any contemporary kitchen. With its extensive range of features, CDA FW281 not only simplifies cooking processes but also enhances the aesthetics of kitchen spaces.

One of the standout characteristics of the CDA FW281 is its spacious interior capacity, allowing users to accommodate a variety of cooking and reheating tasks effortlessly. With a capacity of 28 liters, this microwave is perfect for families or individuals who require a reliable cooking appliance for daily use. The appliance also offers multiple power levels, providing versatility to users by allowing precise control over cooking times and temperatures.

CDA FW281 incorporates cutting-edge technology, including a highly efficient inverter system. This ensures that heat is distributed evenly throughout the microwave, reducing cold spots and providing consistent cooking results. The inverter technology allows for gentle simmering, ensuring that dishes maintain their flavor and texture while being cooked or reheated.

Another significant feature of the CDA FW281 is its user-friendly control panel, which is designed for easy navigation and operation. The intuitive interface allows users to select various cooking functions, including defrost, reheat, and various preset options tailored to specific food types. The digital display adds to the overall convenience, allowing for easy monitoring of cooking progress.

Safety is also a priority with the CDA FW281. The appliance is equipped with a child lock feature that prevents accidental operation, making it a safer choice for families with young children. The durable design includes a stainless-steel finish, ensuring that the microwave not only performs well but also withstands the rigors of daily use while maintaining its aesthetic appeal.

In conclusion, the CDA FW281 built-in microwave is a versatile and efficient kitchen appliance. With its generous capacity, inverter technology, user-friendly controls, and safety features, it stands out as a reliable choice for those looking to enhance their cooking experience. Its modern design seamlessly integrates into any kitchen layout, making it a popular option for both home cooks and culinary enthusiasts alike.