CDA HCC662 manual Care and Maintenance, If your Hob is not working, Contact CDA Customer Care

Page 7

Care and Maintenance

Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance.

You should use a non-abrasive cleaner to clean the hob top. Any abrasive cleaner (including Cif) will scratch the surface and could erase the control panel markings.

Types of residues

Clean with

Cleaning advice

 

 

 

Light

Cleaning sponge and soft cloth

Wipe over the zone to be cleaned with a sponge and hot

water, and then wipe off with a soft dry cloth.

 

 

 

 

 

Accumulated baked-on stains/

Cleaning sponge or glass scraper

Wipe over the zone to be cleaned with a sponge and hot

water, using a ceramic scraper to remove any large marks

dirt, sugar spills or melted plastics

and soft cloth

or stains and then wipe off with a soft dry cloth.

 

 

 

 

 

Rings and hard water residues

White vinegar and soft cloth

Pour a small amount of warm white vinegar onto the stain,

leave it to stand, and then wipe off with a soft dry cloth.

 

 

 

 

 

9

fast frying steaks

 

Important:

Steam cleaners must not be used when cleaning this appliance.

Mains electrical voltage:

230 – 240Vac

Total rated electrical consumption:

6.3 kW

Please note:

The hob is equipped with a safety device that will switch off the zones and flash F on the zone displays if the control keys are touched for more than ten seconds, for example an object rests over the keys. Once the cause of the error is removed, the zone displays will stop flashing and the hob will be ready to be switched on again.

If your Hob is not working:

1.Check that the required zone is switched on.

2.Check that the mains supply has not been switched off.

3.Check that the fuse in the spur has not blown.

Contact CDA Customer Care

A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu

6

Image 7
Contents HCC662 Ceramic Hob CE Declarations of Conformity Appliance informationPlease note Control panel Using your hobResidual Heat Indicators ZonesTo switch a zone off To switch the zone onTo set the power level without Boost function To set the power level with Boost functionZone Size Minimum Pan Size mm Maximum Pan Size mm Efficient Use of your HobIf your Hob is not working Care and MaintenanceContact CDA Customer Care Mains Electricity Connection Wall furniture requirements If fitting a cooker hood above the hobHow to install the hob How to Install the HobPage Customer Care Department 01949 862

HCC662 specifications

The CDA HCC662 is a modern cooker hood designed to enhance the functionality and aesthetic appeal of any kitchen. This appliance combines efficiency, style, and advanced features to create a cooking environment that is both comfortable and enjoyable for the home cook.

One of the standout features of the CDA HCC662 is its sleek design. Available in a range of finishes, including stainless steel, this cooker hood not only performs well but also complements various kitchen décors. The elegant lines and contemporary look make it a focal point in the kitchen while maintaining a sense of simplicity and sophistication.

The CDA HCC662 is equipped with an efficient extraction system that effectively removes smoke, odors, and grease from the cooking area. With a powerful motor, it offers multiple fan speed settings, allowing users to adjust the extraction rate according to the cooking intensity. This versatility ensures that the air remains fresh, regardless of the dish being prepared.

In terms of technology, the CDA HCC662 boasts an energy-efficient design. It typically utilizes LED lighting, which not only illuminates the cooking area with bright, clear light but also consumes less energy compared to traditional bulbs. This feature enhances visibility while cooking, making it easier to monitor food preparation and cooking progress.

Another notable characteristic of the CDA HCC662 is its compatibility with both ducted and recirculating installation options. This flexibility allows users to choose the setup that best fits their kitchen layout and ventilation requirements. For those who opt for recirculating installation, the cooker hood can be fitted with high-quality charcoal filters to eliminate unwanted smells and airborne particles.

Ease of use is another priority with the CDA HCC662, featuring intuitive controls that make it simple to adjust settings and fan speeds. The design also prioritizes easy cleaning, with smooth surfaces and removable filters that can be washed or replaced with minimal effort.

In summary, the CDA HCC662 is a stylish and functional cooker hood that features modern technologies and characteristics aimed at improving kitchen environments. With its powerful extraction capabilities, energy-efficient lighting, and flexible installation options, it combines performance with ease of use, making it an ideal choice for contemporary kitchens.