CDA WC460 manual User instructions

Page 16

User instructions

•Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system.

•When necessary, refill the regenerating salt container before starting the washing program. In this way, the excess saline solution will be immediately removed by the water; the prolonged presence of salt water inside the tank may lead to corrosion.

Be careful not to confuse the salt and detergent packages; adding detergent to the salt container will damage the water softening system.

ADJUSTING THE WATER SOFTENING SYSTEM (available in all programs except the soak program)

NOTA: for the setting below to be possible, a washing program other than the soak program must be set.

Press the PROGRAM DELAY button (8) and keep it pressed until the preset value appears followed by a full stop (normally 3.). Release the button then press it again in succession to display the value required, referring to the table.

The 6 setting levels available will appear in this order: 3., 4., 5., 0., 1., 2..

When the value required appears on the diplay, release the button; after 5 seconds the system automatically returns to setting of the program delay, and the setting will be made with the chosen value.

N.B.: the display shows the water hardness setting and the program delay. The dot (.) after the number indicates that the water hardness setting is being displayed. If the dot (.) does not appear, the program delay is being displayed.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents WC460 Integrated Slimline Dishwasher Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up Water supply connectionConnecting to the Water Supply Drain ConnectionElectrical connection and precautions If the Appliance is Provided with a Plugless Supply CordUser instructions For Great Britain onlyDescription of the controls Setting the Washing Program and Switching onUpper panel Options cannot be used with the soak program Washing programs Delaying the ProgramOption Button Cancelling the Current Program Changing the ProgramEND of Cycle Removing the DishesUsing the water softening system Operating instructionsUser instructions Using the rinse aid and detergent dispensers Water Hardness TableAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Lower Basket Using the basketsLoading the Lower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketCleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Spray ARM, Travelling Version Cleaning the Filter UnitGeneral Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Troubleshooting Fault DescriptionWater loaded accurately. Interrupt the program Technical Data 19 570 0079

WC460 specifications

The CDA WC460 is a sophisticated, modern wall-mounted cooker hood designed to enhance both functionality and aesthetics in contemporary kitchens. This appliance merges advanced technology with sleek design, making it a popular choice for homeowners and culinary enthusiasts alike.

One of the standout features of the CDA WC460 is its powerful extraction capacity. With a maximum airflow of up to 750 m³/h, this cooker hood efficiently removes smoke, steam, and cooking odors, ensuring a fresh and clean kitchen environment. This high extraction rate accommodates various cooking styles, from simple frying to elaborate multi-course meals, making it suitable for any culinary task.

The cooker hood is equipped with robust grease filters that effectively trap grease particles, ensuring optimal performance and reducing the likelihood of buildup in the kitchen. These filters are not only efficient but also washable, making maintenance simple and sustainable, as users can easily clean them to maintain performance over time.

Another highlight of the CDA WC460 is its energy efficiency. It features LED lighting, providing bright, focused illumination on cooking surfaces while consuming minimal energy. This is an important consideration for eco-conscious consumers who wish to reduce their carbon footprint without compromising on culinary performance.

In terms of design, the CDA WC460 presents a sleek stainless steel finish that complements a wide range of kitchen decors. Its minimalist aesthetic is perfect for modern homes, integrating seamlessly with other appliances and cabinetry. The wall-mounted structure allows for flexible installation options, making it a versatile choice for kitchen layouts.

Additionally, the CDA WC460 offers user-friendly controls. It includes push-button controls that are intuitive, allowing users to seamlessly adjust fan speeds and lighting with ease. Multiple fan speed settings provide the flexibility to tailor the extraction power according to the cooking activity, ensuring an optimal kitchen atmosphere.

Furthermore, the appliance operates quietly, with noise levels designed to be minimal even at higher extraction speeds. This feature is essential for maintaining a pleasant kitchen environment, especially in open-plan living spaces where noise can be a concern.

In summary, the CDA WC460 is an exceptional choice for those seeking an efficient and stylish cooker hood. With its powerful extraction capabilities, energy-efficient lighting, easy maintenance, and sleek design, it stands out as a reliable appliance for any modern kitchen. As culinary trends continue to evolve, the CDA WC460 is poised to meet the demands of both home cooks and professional chefs alike.
Top Page Image Contents