Installing the Yoke Mount Kit

(2) End Caps

SM 26 Yoke Mount Kit • Setup

Guide

This setup guide contains installation information about the Extron SM 26 Yoke Mount Kit.

WARNING: Risk of personal injury or property

damage. The final installation should be able to continuously support the speaker weight. The final installation should also be able to support any short term overloading. Since applications can vary considerably, it is assumed that the installer will exercise good judgment when selecting the mounting location, method, and hardware. Installation and service must be performed by authorized personnel only.

The yoke mount can be installed either vertically or horizontally.

NOTE: Observe all applicable building codes and local

ordinances when installing the speaker.

ATTENTION: Attaching a secondary support cable to the SM 26 speaker is required when using the yoke

mount kit (see step 9 on the following page).

1.Locate a suitable mounting location where the yoke mount will be installed.

NOTE: Ensure that the

speaker cable will be

accessible after the

yoke is mounted.

Quick Connect Contacts

5. Connect the speaker cable to the quick connect contacts

Mounting

Holes

2.Drill a hole for the speaker wire.

3.Route the speaker wire through the speaker wire hole while leaving enough slack for connection to the 0° mounting plate.

4.Use the appropriate hardware to attach the yoke to the wall using the provided mounting holes, as shown in the following diagram.

8.63"

(219.20 mm)

8.20"

(20.8cm)

5.30"

(13.5cm)

on the 0° mounting plate (see the SM 26 Setup Guide for

further details).

6.Unscrew the two end caps from the

top and bottom of

the speaker and remove the caps; keep the end cap screws to attach the speaker to the yoke mount, as shown on the right.

NOTE: Use a 5/32-inch

hex driver when

installing or removing

the yoke mount

screws. Retain the

end caps for future

use if the speaker will

not be used with the

yoke mount.

NOTE: Mounting hardware is not provided.

SM 26 specifications

The Extron SM 26 is a powerful and versatile audio mixer designed to meet the demands of modern audiovisual applications, making it an ideal choice for educators, corporate settings, and more. This mixing device showcases a robust set of features, advanced technologies, and practical characteristics that enhance its usability and performance.

One of the standout features of the SM 26 is its ability to accommodate a variety of audio sources. The mixer comes with six microphone inputs, which allows for flexible connectivity. It supports both balanced and unbalanced signals, ensuring compatibility with a wide range of audio equipment. Additionally, the mixer includes a dedicated stereo input for connecting external audio sources like computers and media players, enhancing its versatility for various applications.

In terms of audio quality, the SM 26 excels with its high-performance audio processing capabilities. It is equipped with a built-in equalizer, which allows users to adjust the frequency response of each channel to achieve the desired sound. This feature is particularly beneficial in environments with challenging acoustics, ensuring that voices remain clear and intelligible. Furthermore, the mixer features a low-noise design, which helps maintain the integrity of the audio signal.

The SM 26 also incorporates advanced technologies aimed at simplifying operation and enhancing the user experience. Its intuitive layout includes dedicated volume controls for each channel, enabling users to make quick adjustments on-the-fly. The mixer is designed for hassle-free setup and integration, with standard 3-pin XLR connectors for microphones, making it easy to connect to existing audio systems.

A significant characteristic of the SM 26 is its durability and reliability, a hallmark of Extron products. Built to withstand regular use in demanding environments, the mixer features rugged construction and high-quality components. This reliability ensures that users can rely on the SM 26 for consistent performance across a wide range of events and installations.

In summary, the Extron SM 26 is a feature-rich audio mixer that provides exceptional performance, flexibility, and reliability. With its array of inputs, advanced audio processing capabilities, user-friendly design, and robust construction, it is an excellent choice for any setting where high-quality audio is a priority. Whether in a classroom, conference room, or event venue, the SM 26 delivers superior sound management solutions tailored to diverse needs.