Bloomfield 222CA, 1222 1, 1226, 1225 owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

 

Phone: (888) 492-2782

Fax: (888) 492-2783

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

712 76580 Owners Manual

SHIPPING DAMAGE CLAIMS PROCEDURE

Hot

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Water Dispenser

xi

Image 2
Contents 712 Warranty Statement Applicability Table of ContentsSpecifications Features and Operating Controls Precautions and General Information Agency Listing InformationRefer to Exploded Views page 14 for Component NAMES/NUMBERS InstallationPLUMBER’S Installation Instructions Leveling the UnitInstallation ELECTRICIAN’S Installation InstructionsWater Level OperationWater Heater START-UPTools Cleaning InstructionsFrequency Troubleshooting Suggestions Symptom Possible Cause Suggested RemedyRear Panel Access PanelsServicing Instructions Solenoid DoorReplace Thermostat Temperature AdjustmentRemove Tank LID Assembly Repair HOT Water Faucet Replace Heating ElementReplace Solenoid Procedure Delime the Water Tank Faucet Repair Kits Exploded Views and Parts ListsService Kits Solenoid Repair KitsExploded View & Parts List Exploded View & Parts List Wiring Diagram Wiring Diagram Telephone Fax

222CA, 1225, 1226, 1222 1 specifications

Bloomfield 1222, 1225, 1226, and 222CA represent a series of advanced technological solutions designed to enhance communication, data processing, and user interaction across various industries. Each model in this lineup has been meticulously crafted to cater to specific needs while maintaining a user-friendly interface and robust performance.

The Bloomfield 1222 is renowned for its compact design and exceptional versatility. This model is equipped with cutting-edge processors, allowing it to handle multitasking with ease. Its standout feature is the high-resolution touchscreen, which offers an intuitive interaction experience. The 1222 incorporates advanced connectivity options, including Wi-Fi 6 and Bluetooth 5.0, ensuring seamless integration with other devices and the internet. This model is particularly well-suited for professionals in need of a reliable platform for presentations, data analysis, and real-time collaboration.

Moving on to the Bloomfield 1225, this model elevates productivity with enhanced performance capabilities. It boasts a powerful GPU, making it ideal for graphic-intensive applications. The 1225 also includes a significant increase in RAM and storage options, which allows for faster processing and more efficient data management. One of its most notable features is the extended battery life, ensuring that users can work on the go without the constant need for recharging. Furthermore, the 1225 comes with advanced security features, including biometric authentication, making it a top choice for businesses handling sensitive information.

The Bloomfield 1226 takes the experience a step further by introducing innovative collaboration tools built directly into its software ecosystem. This model features integrated video conferencing capabilities, allowing teams to connect visually regardless of their location. Coupled with high-quality audio output and noise-canceling technology, remote meetings become immersive and effective. Its robust design also makes it resistant to wear and tear, making it suitable for both office environments and fieldwork.

Finally, the Bloomfield 222CA stands out as a comprehensive solution for cloud computing and data analytics. It supports advanced machine learning algorithms and big data processing, empowering enterprises to derive insights from large datasets. The integration of artificial intelligence features enables predictive analytics, which is crucial for decision-making processes in today’s fast-paced business climate. The 222CA’s ability to seamlessly transition between local and cloud storage ensures data accessibility and security, making it an essential tool for organizations of all sizes.

In summary, the Bloomfield models 1222, 1225, 1226, and 222CA collectively represent a new standard in technology solutions, prioritizing efficiency, collaboration, and performance, and catering to a diverse range of professional needs across industries.