Bloomfield HD8799, HD8802 owner manual Installation, Equipment Hazard, Leveling the Unit

Page 6

INSTALLATION

READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION

CAUTION: Equipment

Electrical Damage

DO NOT plug in or energize this appliance until all Installation Instructions are read and followed. Damage to the Brewer will occur if these instructions are not followed.

CAUTION: Unstable

Equipment Hazard

It is very important for safety and for proper operation that the warmer is level and stable when standing in its final operating position. Provided non-skid feet must be installed at each corner of the unit. Do not install this appliance if the feet are missing or damaged.

WARNING ELECTRIC SHOCK HAZARD:

Warmer must be properly grounded to prevent possible shock hazard. Electrical shock will cause death or serious injury.

REFER TO EXPLODED VIEWS PAGE 9 FOR COMPONENT NAMES/NUMBERS

Unpack the unit. Inspect all components for completeness and condition. Ensure that all packing materials have been removed from the unit.

LEVELING THE UNIT

Verify that a slip-resistant foot is installed at each corner of the dispenser.

Set the warmer in its operating location. Be sure all four feet touch the counter to prevent tipping.

ELECTRICIAN’S INSTALLATION INSTRUCTIONS

REFER TO ELECTRICAL SPECIFICATIONS - Page 1 Check the nameplate to determine correct electrical service required for the warmer.

Models HD8799 and HD8802 dispensers are equipped with a cord and plug. They requires a 115 - 125 volt circuit (50/60 Hz, 2 wire plus ground, with NEMA 5-15R receptacle).

IMPORTANT: The ground prong of the plug is part of a system designed to protect you from electrical shock in the event of internal damage. Never cut off the ground prong nor twist a blade to fit an existing receptacle. Contact a licensed electrician to install the proper circuit and receptacle.

GROUND

PIN

IMPORTANT:

Supply power must match nameplate for voltage and phase. Connecting to the wrong voltage will damage the warmer or result in decreased performance. Such damage is not covered by warranty.

NEMA 5-15P

NEMA 5-15R

PLUG

RECEPTACLE

4

Image 6
Contents 595 Limited Warranty Statement Table of Contents Features & Operating Controls Electrical Damage Burn HazardEquipment Hazard InstallationELECTRICIAN’S Installation Instructions Leveling the UnitPreparation Temperature Adjustment Model HD8802 onlyOperation USECleaning Instructions Electric Shock HazardTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyExploded View & Parts List Model HD8799 2½-GALLON DispenserModel HD8802 5-GALLON Dispenser Servicing Instructions Wiring DiagramAccess Bottom Panel FaucetParts & Service Description

HD8802, HD8799 specifications

The Bloomfield HD8802 and HD8799 are part of Bloomfield's state-of-the-art line of high-definition projectors designed to redefine the viewing experience. Both models showcase a blend of advanced features, robust technologies, and remarkable characteristics, making them ideal for a variety of settings, including home theaters, corporate environments, and educational institutions.

One of the standout features of the HD8802 is its impressive resolution capabilities. With a true 1080p resolution, it delivers crystal-clear images that cater to the most discerning audience. The HD8799 also supports high-definition content, maintaining a strong performance with its 720p resolution, which ensures delightful viewing experiences without compromising quality.

Brightness is crucial in projectors, and both models excel in this area. The Bloomfield HD8802 boasts an outstanding brightness level of 3000 lumens, allowing it to perform admirably even in well-lit environments. On the other hand, the HD8799, with a brightness of 2500 lumens, strikes a balance between performance and affordability, ensuring vibrant imagery in various lighting conditions.

Contrast ratio also plays a vital role in image quality. The HD8802 features an impressive contrast ratio of 10,000:1, creating deeper blacks and more vibrant colors, enhancing the depth of the projected image. The HD8799, while offering a slightly lower contrast ratio of 8000:1, still provides a commendable performance that enriches color reproduction and detail.

In terms of connectivity, both models come equipped with a comprehensive set of input options, including HDMI, USB, VGA, and AV ports, ensuring compatibility with a wide range of devices such as laptops, gaming consoles, and streaming devices. This versatility makes them easy to integrate into existing media setups.

Furthermore, noise reduction technology has been an essential consideration in the design of both projectors. The HD8802 operates with a minimal noise level, ensuring distractions are kept to a minimum during important presentations or while enjoying movies. The HD8799 similarly integrates advanced cooling systems to maintain quiet operation.

In summary, the Bloomfield HD8802 and HD8799 projectors offer remarkable features and cutting-edge technologies. Whether you’re seeking a high-end solution with the HD8802 or a more budget-friendly option with the HD8799, both models provide exceptional image quality, impressive brightness, and versatile connectivity, making them excellent choices for elevating any visual experience.