Installer

EDF20C

Installation/Care/Use Manual

SEE FIG. 3

11, 12

To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTINGTHE INSTALLATION. CHECKYOUR INSTALLA- TION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES. After installation, leave these instructions inside the fountain for future reference.

IMPORTANT

ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON

IMPORTANT! INSTALLER PLEASE NOTE.

THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE BUILDING PLUMBING SYSTEM.

INSTALLATION INSTRUCTIONS

1.Wall should already be framed for the fountain using the positioning dimensions shown in Figure 1. Shown dimensions pertain to installation location (framing must support up to 150 lbs. weight).

2.Install rough-in plumbing as shown in Figure 1. Connecting lines to be unplated copper. Run supply water inlet line and connect to a service stop (not provided). Turn on supply water and flush thoroughly. Close water supply.

3.Secure the fountain to the wall using bolts and washers (not provided). Tighten securely.

4.Make water supply connections from service stop to the fountain. Turn on water supply and check for leaks. Newly installed water supply line should be insulated after leak check is completed.

5.These products are designed to operate on 20-105 PSIG supply line pressure. If inlet pressure is above 105 PSIG, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting these products to supply line pressures lower than 20 PSIG or higher than 105 PSIG is not covered by warranty.

6.Check stream height from bubbler. Stream height is factory set at 35 PSI. If supply pressure varies greatly from this, remove items 7 and 8 (See Figure 3) and adjust the screw on the regulator (Item 5). Clockwise adjustment will raise stream height and counter-clockwise will lower stream height. For best adjustment stream should be approximately 1" (25mm) above the bubbler guard. (See Figure 2).

TROUBLE SHOOTING AND MAINTENANCE

1.Orifice Assy: Mineral deposits on orifice can cause water flow to spurt or not regulate. Mineral deposits may be removed from

orifice with a small round file not over 1/8" diameter or a small diameter wire. CAUTION: Do not file or cut orifice materials.

96540C (Rev. G - 3/01)

EDF20 specifications

The Elkay EDF20 is an innovative and efficient water dispenser that has gained popularity for its modern design and advanced features. This unit is designed for both residential and commercial use, effectively providing users with quick access to chilled water.

One of the standout features of the Elkay EDF20 is its sleek, contemporary design, which fits seamlessly into a variety of settings, from office break rooms to upscale kitchens. The elegant finish and compact size make it an attractive addition while saving valuable counter space.

The EDF20 is engineered with state-of-the-art cooling technology that ensures water is dispensed at a refreshing temperature. Its internal refrigeration system is both energy-efficient and powerful, providing a continuous supply of chilled water without long waiting periods. Users will appreciate the convenience of instant access to cool water, which is perfect for hydration throughout the day.

Another remarkable aspect of the Elkay EDF20 is its user-friendly interface. The touchless activation lever allows for easy operation, promoting hygienic use. Furthermore, the system is equipped with a built-in filtration unit that helps to remove contaminants, ensuring that the water dispensed is not only cool but also clean and safe for consumption.

The Elkay EDF20’s installation is straightforward, making it an appealing choice for both DIY enthusiasts and professionals. It connects easily to existing water lines, and its compact design requires minimal space, fitting well into homes, offices, and even public areas.

Additionally, the Elkay EDF20 is designed with sustainability in mind. With features such as a bottle filler option, it encourages users to drink more water while reducing reliance on single-use plastic bottles. This environmentally conscious design resonates with consumers who prioritize eco-friendly practices.

Maintenance of the Elkay EDF20 is simplified with easy-to-access components, allowing for routine checks and updates without hassle. Elkay's commitment to quality ensures that this unit is built to last, contributing to its growing reputation in the market.

In summary, the Elkay EDF20 combines modern aesthetics, advanced cooling technology, ease of use, and a focus on sustainability, making it a standout choice for those looking to enhance their water dispensing experience. Whether in a home, office, or public space, the EDF20 stands ready to meet the hydration needs of its users.