Twisted Pair Cable Recommendations

Use the following pin configurations for twisted pair cables.

TIA/EIA-T568B				Pins:
TIA/EIA-T568B		12345678
		12345678
Pin	Wire Color
Pin	Wire Color

1	White-orange

2	Orange



3	White-green


4	Blue

5	White-blue

6	Green	Insert Twisted
		Insert Twisted
7	White-brown		Pair Wires
				RJ-45
8	Brown			RJ-45
8	Brown	Connector

Figure 6. Twisted Pair Cable Configuration

Supported cables

The XTP PI 400 is compatible with CAT 5e, 6, 6a, and 7 shielded twisted pair (F/UTP, SF/UTP, and S/FTP) and unshielded twisted pair (U/UTP) cable.

ATTENTION:

•Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201 cable.

•To ensure FCC Class A and CE compliance, STP cables and STP connectors are required.

Cable recommendations

Extron recommends using the following practices to achieve full transmission distances up to 330 feet (100 m) and reduce transmission errors:

•Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best performance:

•XTP DTP 24/1000

•XTP DTP 24P/1000

•XTP DTP 24 Plug

Non-plenum 1000 feet (305 m) spool	22-236-03
Plenum 1000 feet (305 m) spool	22-235-03
Package of 10	101-005-02

•If you are not using XTP DTP 24 cable, at a minimum Extron recommends 24 AWG, solid conductor, STP cable with a minimum bandwidth of 400 MHz.

•Terminate cables with shielded connectors to the TIA/EIA-T568B standard.

•Limit the use of more than two pass-through points, which may include patch points, punch down connectors, couplers, and power injectors. If these pass-through points are required, use CAT 6 or 6a shielded couplers and punch down connectors.

NOTE: Using more than three patches with the XTP PI 400 yields varying maximum cable lengths.

Number of Patches	Maximum Transmission Distance

1 or 2	330 ft (100 m)

3	280 ft (85 m)

NOTES: When using CAT 5e or CAT 6 cable in bundles or conduits:

•Do not exceed 40% fill capacity in conduits.

•Do not comb the cable for the first 20 m where cables are straightened, aligned, and secured in tight bundles.

•Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.

•Separate twisted pair cables from AC power cables.

XTP PI 400 Power Injector • Installation and Operation

XTP PI 400 specifications

Extron’s XTP PI 400 is a powerful and innovative product designed to meet the expanding needs of professional audio and video environments. As an integral component within the XTP Systems architecture, the XTP PI 400 provides a robust, reliable, and flexible solution for signal processing in various applications, from corporate settings to educational institutions and beyond.

One of the key features of the XTP PI 400 is its ability to distribute power over the same cabling infrastructure used for video signals. This eliminates the need for additional power supplies and simplifies installation, making it an ideal choice for spaces where cable management and accessibility are critical. The unit provides power to XTP transmitters, allowing for longer distances without compromising signal quality. It supports HDMI, DisplayPort, and other formats, ensuring compatibility across a wide range of multimedia devices.

Utilizing Extron’s innovative XTP technology, the XTP PI 400 supports real-time processing and low-latency signal transmission, making it suitable for live event scenarios and dynamic presentations. The XTP platform is built on twisted pair technology, allowing for transmission distances of up to 330 feet (100 meters) for high-definition video signals, while also featuring a built-in EDID management system. This capability ensures that connected devices communicate effectively and optimize signal quality.

The XTP PI 400 also boasts advanced features such as automatic switching and routing of signals, as well as seamless support for multiple resolutions and formats. This versatility makes it a valuable tool in any AV system, ensuring that users can easily manage their media content. Additionally, the product includes built-in diagnostic tools that provide real-time feedback and status reports, allowing users to troubleshoot issues quickly and effectively.

In terms of design, the XTP PI 400 is compact and rack-mountable, making it easy to integrate into existing AV racks or equipment enclosures. Its intuitive user interface and comprehensive setup options allow for customization and optimization based on specific installation needs. The unit is also engineered with high-quality components to ensure durability and reliable performance over time.

Overall, the Extron XTP PI 400 is a cutting-edge signal processing solution that combines advanced technology, user-friendly design, and exceptional performance. It stands out in the market as a versatile and dependable option for professional AV applications, making it an essential asset for any AV system installation.