Ariston LI 700 I-S-X manual Ready, steady, go

Page 6

Starting the dishwasher

Ready, steady, go!

You have loaded your dishes and you now have to set the wash cycle. It takes just one minute to learn how

After performing all the operations described in the previous paragraphs, if accessible turn the water tap on, open the appliance door and press on-off button "A": indicator light "B" comes on.

Your appliance is now on and awaiting instructions.

Selecting the wash cycle.

Select the wash cycle by pressing button "P". Each time this button is pressed, one of the indicator lights "M" will come on in sequence, select the wash cycle you deem most suitable for the type of dishes to wash (take a look at page 7, where you will find the wash cycle table). Close the appliance door and after a few seconds, you will hear a short beep: the wash cycle has begun.

utmost care, as usual, then insert the dish you had forgotten. When you shut the appliance door, the cycle will start up from where you interrupted it.

Finished?

The end of the wash cycle is indicated by a double beep and the flashing of the wash cycle indicator light "M". Open the dishwasher door, press the ON-OFF button as well, thus cutting off the electricity supply to the appliance.

If accessible turn off the water tap.

Wait a few minutes before unloading the dishes: they are very hot! If you wait a little while, they dry better thanks to the steam.

Empty the lower rack first.

You decide when it starts.

When you have loaded the dishes, you can choose when to start your dishwasher before setting the desired wash cycle. Press button "C" to delay the start of the wash cycle by 2, 4 or 6 hours. Each

You want to wash on the upper rack only? Remember to use half the amount of detergent.

Your dishwasher also allows you to wash half a load, to save water and electricity.

Before setting any wash cycle whatsoever, press

Modifying a wash cycle in progress.

If you have chosen the wrong cycle, not to worry! You can modify the wash cycle in progress, if it has only just started. Open the appliance door carefully to avoid any hot water splashes, then keep button "P" pressed for approximately 5 seconds, until you hear a short beep. Indicator light "M" will come off and at this point, all the settings will have been cancelled. You are now free to re-set the correct wash cycle.

You've left out a dish?

Well, it happens to everyone. Interrupt the wash cycle by opening the appliance door with the

You can cancel the

wash cycle in progress, if it has only just started.

If opening the door soon

after the end

of the program, or

during it, stand away from the Dishwasher, to avoid possible injury from hot steam.

There's been a power failure? Have you opened the dishwasher door?

The wash cycle stops and then restarts when the electricity comes back on or when you shut the door. Everything is under control!

Do you want extra drying?

Press button "E" before you start the selected wash cycle. A long beep will tell you that you have selected extra drying and the wash cycle will last longer in order to provide you with drier dishes.

time you press it, you will hear a short beep and indicator light "D" corresponding to the selected delay will come on.

Now you can select the desired wash cycle. Close the appliance door and, after you hear the beep, the countdown to the delayed start will begin.

Once this time is up, the indicator light will stop flashing and the wash cycle will begin.

If you change your mind and you wish to set a different delay, just open the appliance door, press button "C" and repeat the selection.

If, on the other hand, you want to cancel the delayed start set and you want the wash cycle to start immediately, press the button repeatedly until indicator light "D" comes off. Once you close the door, the wash cycle set previously will begin.

button “Q” to select that you want to run a half cycle on the upper rack.

When you press it, you will hear a beep and indicator light “R” corresponding to the selected function will come on.

Make sure the wash

cycle has ended before

removing the dishes!

www.aristonappliances.us

ARISTON DISHWASHER - User Manual 5

Image 6
Contents LI 700 I-S-X Quick guide to your dishwasher Important Safety Instructions IntroductionGet to know the parts which make up your dishwasher Technical CharacteristicsHow is it made? Psi-145 psi, 30 KPa÷1MPa 0,3 ÷10 barWhat goes into the lower rack? How to load your dishesHow to adjust the top rack What goes into the upper Rack?Ready, steady, go Rinse aid Detergent and rinse aidIt wont close Loading the rinse aidWash cycle for every degree of soil DVKIf you have a problem, read this Washing special items Cleaning and special maintenance Keep your dishwasher in shapeUn guide rapide pour tout savoir sur votre lave-vaisselle Normes de sécurité importantes Allumage l’un après Comment est-il fait ?OFF Ajouter du produit deRéglage du panier supérieur Que ranger dans le panier supérieurAvertissement Utilisez nos paniersAllons-y Produit de rinçage Produit de lavage et de rinçageIl ne ferme pas Chargement du produit de rinçage7UHPSDJH Chaque besoin son programmeDydjh 3URJUDPPHVotre eau Sivousavezunproblème,lisezcequisuitLe lavage de vaisselle spéciale Nettoyage et entretien particuliers Gardez votre lave-vaisselle en pleine formeGuía rápida para el lavavajillas Importantesnormasdeseguridad IntroducciónCaracterísticas técnicas ¿Cómo está compuesto?¿Cómo se carga la vajilla? ¿Listos?, ¡ya ¡No se cierra Detergente y abrillantadorCarga del detergente Abrillantador5iSLGR Cada tipo de suciedad tiene su programa1RUPDO DydgrSi se presenta un problema, leer aquí Agua de casaEl lavado de piezas especiales Limpieza y cuidados especiales Mantener eficiente el lavavajillas

LI 700 I-S-X specifications

The Ariston LI 700 I-S-X is a cutting-edge product in the world of home appliances, particularly focused on providing energy-efficient heating solutions. This innovative wall-mounted boiler is designed to cater to the needs of modern households requiring reliable hot water and heating solutions with optimal efficiency and performance.

One of the main features of the Ariston LI 700 I-S-X is its advanced heating technology. The unit boasts a high-efficiency condensing heat exchanger that maximizes thermal performance. This feature ensures that the boiler not only heats water quickly but also retains heat efficiently, allowing for energy savings and reduced utility bills. The condensing technology captures waste heat from the exhaust gases, promoting higher efficiency levels compared to traditional boilers.

The boiler operates at a remarkable modulation ratio, meaning it can adjust its output according to the heating demand of the home. This characteristic allows for a more consistent temperature control and reduces energy wastage, making it an environmentally friendly choice for home heating.

In addition to its efficient heating capabilities, the Ariston LI 700 I-S-X integrates smart technology. The unit is compatible with smart home systems, allowing users to control their heating remotely via smartphone applications. Users can easily adjust the temperature settings, create schedules, and monitor energy consumption, enhancing convenience and providing greater control over home heating.

Safety features are also a significant aspect of the Ariston LI 700 I-S-X. It is equipped with multiple safety sensors that monitor temperature and pressure, ensuring safe operation and preventing potential hazards. The smart diagnostics feature alerts users to maintenance needs, allowing for timely servicing and prolonged lifespan of the unit.

The compact design of the Ariston LI 700 I-S-X makes installation straightforward, fitting well into various spaces without compromising on performance. With its sleek appearance, it can blend seamlessly with modern home interiors.

In summary, the Ariston LI 700 I-S-X is a feature-rich wall-mounted boiler offering efficient energy use, smart technology integration, and safety features, making it a premium choice for contemporary heating solutions. Its performance, combined with user-friendly operation and smart features, positions it as an ideal option for households seeking reliable and efficient home heating solutions.