Extron electronic FF 120T user manual Installing the speaker in the ceiling, Power up

Page 3

FF 120T

User’s Manual

Flat Field Speaker

 

 

 

 

 

7 Installing the speaker in the ceiling

See the following illustration.

a. Replace the cover plate and tighten the two cover screws.

b. Install the included T-rail crosspiece into the ceiling opening up against the cut tile.

c. Set the speaker into place so that the edges are hidden by the support rails.

T-rail (1)

Route the cable through the seismic anchor ring and bendout tab.

Anchor this end to a suitable secure point.

 

Seismic

Bend Up Tab

Safety

Cable

 

Repeated bending of the tab

 

may cause it to break off.

9 Power up

After checking all speaker connections, power up the amplifier.

8 Attaching the seismic support lines

If seismic support lines are being used, connect a line through the seismic anchor ring on the top terminal cover plate and attach it to one of the center seismic bendout tabs (the center tab is preferred) located on either side the speaker as shown below. Use a small screwdriver or similar tool to bend out the tab. See the following illustration.

NObserve all applicable building codes and local ordinances when installing the speaker.

3

Image 3
Contents Remove the terminal cover plate Power downSuspended ceiling installation Connecting wires to the CPX 120 terminal block6a Connecting wires from the CPX 120 to the speaker Installing the speaker in the ceiling Power upAttaching the seismic support lines Specifications

FF 120T specifications

The Extron FF 120T is a versatile and powerful audio solution designed for a wide range of commercial audio applications. This ceiling tile speaker is engineered to deliver high-quality sound with exceptional clarity, making it an ideal choice for environments such as classrooms, conference rooms, and public spaces. One of the standout features of the FF 120T is its unique design, which allows the speaker to seamlessly blend into the ceiling grid while providing excellent audio performance. This aesthetic appeal is especially important in professional settings where visual distractions need to be minimized.

The FF 120T incorporates advanced technologies that enhance its performance. One key feature is the use of a high-fidelity driver, which ensures that the audio produced is clear and intelligible, even in noisy environments. This driver is paired with a carefully designed enclosure, which helps to optimize sound dispersion and minimize sound leakage, resulting in a more focused audio experience. With a frequency response extending from 55 Hz to 20 kHz, the FF 120T handles a wide range of sound frequencies, delivering a balanced audio experience across music and speech.

Installation is straightforward thanks to the FF 120T's lightweight design and the included mounting hardware. Designed for standard 2' x 2' ceiling grid systems, the speaker can be easily integrated into new constructions or retrofitted into existing spaces. Additionally, the FF 120T supports a variety of audio sources, making it adaptable to different environments where audio needs may vary.

Another important characteristic of the FF 120T is its reliability. Constructed from high-quality materials, the speaker is designed to withstand the rigors of commercial use. Its robust construction ensures durability over time, even in high-traffic areas. Furthermore, the performance of the FF 120T can be enhanced when combined with other Extron products such as amplifiers and audio processors, providing a comprehensive audio solution for any setting.

With its blend of aesthetic design, advanced sound technologies, and ease of installation, the Extron FF 120T is an excellent choice for anyone looking to enhance their audio experience in a professional environment. Whether for enhancing the clarity of speech in a classroom or providing background music in a lobby, this speaker delivers superior sound performance that meets the demands of modern audio applications.