Interior Shelves, Dispense-A-Can

fig. 5

English

Interior Shelves

English

To remove or replace a full-width slide-out shelf: (see fig. # 4)

1. Gently tilt the shelf up and slide	fig. 4
forward until the shelf has been completely
removed.

2.To replace the shelf, gently slide the shelf back. Reversing Interior Shelf:

1.When storing a 2-Liter bottle in the door, the shelf should be installed with the indent side facing out and on the left

2.When not storing a 2-liter bottle in the door, the

shelf should be installed with the indent side facing in on the right side.

Dispense-A-Can™

The refrigerator has a convenient "Dispense-A-CanTM" storage compartment. Simply stack cans vertically, loading from the top and drawing them from the bottom.

Defrosting Your Refrigerator

•For maximum energy efficiency, defrost freezer section whenever frost accumulates to a thickness of 1/4" or more on freezer walls. Note that frost tends to accumulate more during the summer months.

•To defrost, remove the food and ice cube tray from the freezer section. Make

sure the drip tray is under the freezer section and turn off the thermostat. Defrosting may take a few hours.

• While defrosting, water will accumulate

	in the drip tray. The drip tray may also
	need to be emptied during the defrost
	process. Do not leave unattended. (see
	Fig. 5)
	• After defrosting, empty and wipe down	drip tray
	the drip tray, as well as the interior of	drip tray
	the drip tray, as well as the interior of
	the refrigerator.