Rear panel features, Operation | Extron electronic P/2 DA6XI

P/2 DA4xi and P/2 DA6xi, cont’d

1Power LED: A green LED indicates that the distribution amplifier is receiving power.

Rear panel features

3.	Hold the unit against the underside of the surface through
	which it will be mounted. Mark the four screw holes on
	the underside of the surface to which you are mounting
	the device.
4.	Drill four pilot holes, each 3/32" in diameter by 1/4" deep,

P/2 DA6xi

100-240V 0.2A

50/60 Hz

P/2 DA4xi

100-240V 0.2A

50/60 Hz

3		4		5
		1	3	5
INPUT		(LOCAL MONITOR)
		(LOCAL MONITOR)
	VIDEO GAIN	2	4	6
	1V	2	4	6
P/2 DA6xi	.7V
			OUTPUTS3
		1	3
INPUT		(LOCAL MONITOR)
		(LOCAL MONITOR)
	VIDEO GAIN	2	4
	1V	2	4
P/2 DA4xi	.7V
		OUTPUTS	3

	where you made marks.
5.	Using the four wood screws provided, attach the brackets
	to the mounting surface.
6.	Slide the unit up and down or back and forth in the
	mounting brackets until the face of the unit is at the
	desired height. Tighten the screws that secure the bracket
	in place.
	a.	Mark the location of the brackets relative to the
		screws.
	b.	Remove the unit from the underside of the surface.
	c.	Tighten the screws.
	d.	Replace the switcher on the underside of the surface
		(step 5).

Front panel indicators

VGA DISTRIBUTION AMPLIFIER

1Power LED — A green LED indicates that the distribution amplifier is receiving power.

2Video Gain sliding switch — Used for installations with long output cable runs, the 1.0 V (up) position gives a brighter picture. The default Video Gain setting is 0.7 V (down).

3Input Connector — Connect the input cable (using VGA-UXGA signals) to the DA’s 15-pin HD female connector.

4Local Monitor — Connect a local monitor to this 15-pin HD female connector for loop-through capability.

5Output Connector — Connect the output device to the 15-pin HD female connector.

Operation

After the distribution amplifier and its connected devices are powered up, the system is fully operational. If any problems occur, verify that the cables are properly routed and connected.

Signal input and output connections

All connections, including power, input, and output are located on the back of the rear panel of the P/2 DA4xi and P/2 DA6xi.

P/2 DA4xi/6xi • Installation

P/2P/2DA4xi/6xi••InstallationOperation

P/2 DA6XI, P/2 DA4XI specifications

Extron Electronics is a well-known name in the audiovisual industry, specializing in the design and manufacturing of high-performance signal processing and distribution equipment. Among their impressive lineup, the P/2 DA4Xi and P/2 DA6Xi stand out as versatile and reliable distribution amplifiers that are ideal for various AV applications.

The P/2 DA4Xi is a four-output distribution amplifier, while the P/2 DA6Xi offers six outputs. Both models are designed to amplify composite video signals and distribute them to multiple displays or devices without signal degradation. This makes them perfect for use in educational settings, corporate environments, and other multimedia applications where clarity and quality are paramount.

One of the main features of these distribution amplifiers is their capability to support a wide range of video formats. They can handle standard composite video signals, accommodating different resolutions and signal sources, ensuring compatibility with legacy video equipment. This flexibility allows users to incorporate various devices into their AV systems without worrying about connectivity issues.

Another key characteristic of the P/2 DA4Xi and P/2 DA6Xi is their built-in signal processing technology. Each unit is equipped with advanced signal equalization and video bandwidth capabilities. This technology ensures optimal video quality by compensating for signal loss that may occur over long cable runs. Furthermore, the amplifiers provide bright and sharp images free from ghosting or distortion, even across extended distances.

The user-friendly design of these distribution amplifiers is also noteworthy. They feature a compact and rack-mountable design, allowing for easy integration into existing AV systems. Additionally, the intuitive front panel layout provides straightforward access to the power and output status indicators, making monitoring effortless.

Both the P/2 DA4Xi and P/2 DA6Xi are powered by a robust internal power supply, ensuring reliability during operation. They also come equipped with Extron’s exclusive quality assurance features, including comprehensive testing to meet rigorous standards before reaching the market.

In conclusion, Extron's P/2 DA4Xi and P/2 DA6Xi distribution amplifiers are exemplary products that meet the needs of modern audiovisual systems. With their advanced signal processing technology, compatibility with a variety of video formats, and user-friendly design, these amplifiers provide reliable and high-quality video distribution solutions for a wide range of applications.