Installing Your Refrigerator

English

General:

•Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use sponge or soft cloth, dampened with the cleaning solution, to wipe down your refrigerator.

•Rinse with clean warm water and dry with a soft cloth.

•Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,concentrated detergents, solvents or metal scouring pads. SOME of these chemicals may

dissolve, damage and/or discolor your refrigerator.

Door Gaskets:

•Clean door gaskets every three months according to general instructions. Gaskets must be kept clean and pliable to assure a proper seal.

•Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and assure a good seal.

Light Bulb Replacement

1.Switch off power to refrigerator.

2.Allow light bulb to cool before removing.

3.Remove bulb by screwing it out counter-clockwise.

4 Always replace with appliance type light bulb rated at 15 watts or lesser wattage.

5. Do not exceed the 15 watts rating at any time.

Power Interruptions

•Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs. When power has been restored, replug power cord to AC outlet. If outage is for a prolonged period, inspect and discard spoiled or thawed food in freezer and refrigerator. Clean

refrigerator before reusing.

Vacation and Moving Care

•For long vacations or absences, empty food from refrigerator and freezer, move the temperature DIAL to the OFF position and clean the refrigerator and door gaskets according to "General cleaning" section. Prop doors open, so air can circulate inside.When moving always move the refrigera- tor vertically. Do not move with the unit lying down. Possible damage to the sealed system could occur.

.10.

Unpacking Your Refrigerator

1.Remove all packaging material. This includes the foam base and all adhesive tape holding the refrigerator accessories inside and outside. Slide out and remove plastic or foam guard used to secure the compressor from shipping damage due to vibration and shock.

2.Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator.

Adjusting Your Refrigerator

Leveling Your Refrigerator:

•Your refrigerator has two leveling legs which are located in the front corners of your refrigerator. After properly placing your refrigerator in its final position, you can level your refrigerator.

•Leveling legs can be adjusted by turning them clockwise to raise your refrigerator or by turning them counterclockwise to lower

your refrigerator. The refrigerator door will close easier when the leveling legs are raised.

Proper Air Circulation

•To assure your refrigerator works at the maximum efficiency it

was designed for, you should install it in a location where there is proper air circulation, plumbing and electrical connections.

•The following are recommended clearances around the refrigerator: Sides……………3/4 "(19mm)

Top....................2" (50mm) Back..................2" (50mm)

.3.

HR-245U specifications

The Haier HR-245U is a state-of-the-art refrigerator designed to meet the needs of modern households. With its sleek and compact design, this appliance not only enhances your kitchen aesthetics but also provides optimal functionality. It is perfect for small spaces or for those who simply desire a secondary fridge.

One of the standout features of the HR-245U is its impressive capacity. Offering a total storage space of 245 liters, this refrigerator is designed to accommodate a variety of items, from fresh produce to beverages and frozen goods. The flexible shelving system enables users to customize their storage space according to their needs, providing convenience and easy access to food items.

The Haier HR-245U incorporates advanced cooling technology, ensuring that food stays fresh for longer. It utilizes a frost-free system that prevents ice buildup, allowing for hassle-free maintenance. The multi-air flow feature evenly distributes cold air throughout the refrigerator, maintaining consistent temperatures across all shelves. This technology is essential for preserving food quality, as it reduces temperature fluctuations that can lead to spoilage.

Energy efficiency is another key characteristic of the HR-245U. It is designed to consume minimal power while delivering high-performance cooling. This not only translates to lower energy bills but also minimizes environmental impact. With its energy-efficient compressor, the Haier HR-245U is recognized for its quiet operation, making it suitable for households where noise reduction is a priority.

The refrigerator also features a user-friendly LED display that allows for easy temperature control and quick adjustments. The interior lighting is bright and efficient, making it easy to locate items even in low-light conditions.

In addition to its practical features, the Haier HR-245U is engineered with durability in mind. The high-quality materials used in construction ensure longevity, making it a reliable choice for years to come.

Overall, the Haier HR-245U combines functionality, style, and energy efficiency, making it an excellent addition to any kitchen, especially for those looking for a reliable and spacious refrigerator without compromising on design or performance.