Haier HB500BSS user manual Speed Setting Usage

English

5.Add the ingredients to be processed into the glass jar.

6.Put the cover with the measuring cup into the glass jar and press down to secure.

7.The blender has 3 settings. Turn the power switch to the desired setting or press the black button to pulse. Always hold the top of the glass jar while blending.

Speed Setting		Usage
0	= Off	For turning off the power
1	= Low	For light usage with liquids
2	= High	For mixing liquids with solid foods
Black Button = Pulse		For crushing ice and solid foods in short,
		powerful bursts

Note: The pulse setting does not permanently engage in the pulse setting. It will return to the off setting as soon as the button is released. Either press and hold the button in the pulse setting or press repeatedly.

Operate the blender for a maximum of 60 seconds at a time or alternate 60 seconds on, then 60 seconds off to prevent overheating or consequent damage to the blender. For continuous blending action, set the power switch to either the Low or High setting. For short bursts of high speed blending, use the Pulse setting.

When crushing ice alone, add a small amount of water since ice will not crush without some form of liquid. For best results, add 1/2 cup of water for every 1-1/2 cups of ice. Drain any excess water after blending if only ice is required.

8.After using the blender, always move the switch back to the “0” off setting and unplug the appliance from the outlet.

9.To remove the glass jar, simply lift it off the motor base. It is not necessary to rotate the glass jar to remove it.

10.Always clean the jar assembly after each use.

7