Starting and temperature setting, Key definition

H. “Low battery charge” indicator light “on” indicates the battery is at low charge and must be recharged; when connected to AC power supply, the SLT freezer charges the battery automatically.

●Key definition:

There are 4 keys on the temperature control board. With the “Locked” indicator light on, all the keys are locked to prevent misoperations.

●“Function selection”: In unlock mode, press this key to select the desired function from “Internal temperature setting”, “High-temperature alarm setting” and “Low-temperature alarm setting” and the corresponding indicator light will be on.

●“Cancel buzz”: In lock mode, when an alarm occurs, press this key to silence the buzz for one hour, but the alarm by flashing light signals is not cancelled.

●The “△” or “▽” key is for the increase or decrease of values.

Starting and temperature setting

The freezer’s control system is provided with functions of password protection and keyboard locking.

The freezer must be unlocked before use: first press the “△” key, the digits in the internal temperature display area will flash, and then press the “△” or “▽” key to set the value as “06”, and finally press and hold the “Function selection” key for 8s to unlock the freezer.

After installation, the freezer must be left still for over 24 hours before being energized.

1. Initial state upon power-on:

Turn on the battery switch at rear upper of compressor compartment, the SLT freezer is energized and enters into the “power-on” state, and all the parameters are the data before last power failure, and the display indicates actual temperature. The temperature setting is -126℃when the freezer leaves factory.

If actual temperature is higher than temperature setting, delay for one minute, and then the compressor starts running. Meanwhile, if actual temperature is in the range of alarm temperature, light signals flash accompanied with audible buzz.

2.Adjustment of set values 2.1 Unlock

2.2 “Function selection”: in unlock mode, press this key to select the desired function from “Internal temperature setting”, “High-temperature alarm setting” and “Low-temperature alarm setting”.

“Internal temperature setting”: press the “Function selection” key continuously until the “Internal temperature setting” indicator light is on, at which time the display screen will indicate temperature setting and the digits flash, and then change temperature setting by pressing “△” or “▽” to increase or decrease the value, specifically speaking, the value would increase or decrease by 1 if press “△” or “▽” intermittently, while the value would increase or decrease rapidly and continuously by 1 if press and hold

10-24

DW-150W200 specifications

The Haier DW-150W200 is a compact and efficient dishwasher designed for modern kitchens that require functionality without compromising on space. This model embodies Haier's commitment to quality, efficiency, and performance, making it an appealing choice for busy households.

One of the main features of the Haier DW-150W200 is its energy efficiency. This dishwasher is designed to operate with minimal power consumption, earning it a high energy efficiency rating. This not only helps reduce electricity bills but also minimizes the environmental impact, aligning with eco-conscious consumer values.

The DW-150W200 offers multiple washing programs, allowing users to select the appropriate cycle based on their needs. With options for heavy-duty washes, eco-friendly cycles, and quick wash, it caters to various degrees of soil and load sizes. This versatility ensures that all types of dishes, from delicate glassware to heavily soiled pots, receive the attention they require.

In terms of capacity, the Haier DW-150W200 is designed to accommodate a significant number of dishes, making it perfect for families or individuals who host frequently. Its interior layout is thoughtfully designed to maximize space, allowing for the placement of larger items without compromising the washing potential of smaller dishes.

The dishwasher is equipped with advanced technology, including a powerful water spray system that ensures an effective clean every time. This system utilizes multiple spray arms that provide thorough coverage, ensuring that no food residue is left behind, even in hard-to-reach areas.

Noise reduction is another key characteristic of the DW-150W200. Operating at a remarkably low decibel level, it ensures that users can enjoy a peaceful environment even while the dishwasher is running.

Additionally, the intuitive control panel is user-friendly, offering easy access to various settings and programs. The clear LED display allows users to monitor the cycle status effortlessly.

Overall, the Haier DW-150W200 is a reliable and efficient dishwasher that combines innovation, practicality, and energy-saving features, making it an excellent addition to any kitchen. Its stylish design, coupled with its advanced technologies, ensures that users can maintain a clean and efficient kitchen environment with ease.