Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see fig.2). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appliance should not be inclined more than 2. If the appli- ance is level, it will help ensure proper performance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) connec- tor and make sure that it is fastened tightly in place (see fig.1).

If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Fig.1

fig.2

Attention:

The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Use the new hose and the old hose should not be reused.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law).

If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adaptors or the like as they could cause overheating and burns.

.9.

HDW9-AFM specifications

The Haier HDW9-AFM is a modern, efficient dishwasher designed to simplify the task of dishwashing while offering a range of advanced features and technologies. This appliance reflects Haier's commitment to innovation, ease of use, and energy efficiency, making it an ideal choice for contemporary households.

One of the standout features of the Haier HDW9-AFM is its spacious design. With a capacity to accommodate up to 16 place settings, this dishwasher is perfect for larger families or those who frequently entertain guests. The adjustable upper basket provides flexibility, allowing users to customize the space according to their specific needs. Additionally, the lower basket is equipped with foldable tines, ensuring even the largest pots and pans fit comfortably while still getting a thorough clean.

The HDW9-AFM utilizes advanced washing technology, including multiple wash programs tailored to different levels of soiling. With options such as Intensive, Eco, and Quick Wash, users can choose the setting that best suits their requirements, ensuring optimal cleaning performance without wasting water or energy. The Eco mode is particularly noteworthy, as it significantly reduces water consumption while still delivering excellent cleaning results.

This dishwasher is also equipped with a cutting-edge inverter motor, which not only minimizes noise during operation but also enhances energy efficiency. The inverter technology ensures a smoother operation and longer lifespan for the appliance, making it a wise investment for any home.

In terms of convenience, the Haier HDW9-AFM features a delay start option, allowing users to set the dishwasher to begin its cycle at a predetermined time. This is especially useful for taking advantage of off-peak electricity rates or ensuring dishes are clean and ready at a convenient time. The digital display adds to the user-friendly experience, providing clear information on the selected program and remaining time.

For added safety, the HDW9-AFM is equipped with a child lock feature, preventing accidental operation. Additionally, the built-in water softener ensures that dishes come out sparkling, free from unsightly calcium deposits.

With its sleek design and modern features, the Haier HDW9-AFM stands out as a practical and stylish addition to any kitchen. Its combination of efficiency, advanced technology, and thoughtful design makes it an excellent choice for those looking to optimize their dishwashing experience. Whether for everyday use or special gatherings, this dishwasher delivers reliable performance that can meet the demands of any busy household.