Extron electronic P/2 DA2XI MT, 68-713-01 specs

EPower connector — Plug the external 12 V power supply, only when needed (see “Power and Signal indicator LED” on page 2), into this 2-pole captive screw connector. The included power supply is shipped with a plug installed. If you need to cut the DC output cord to a different length and reinstall the plug, refer to the following figure and notes.

Smooth	Ridges
	Ridges
A	A

SECTION A–A

Power Supply	Tie Wrap
Output Cord

3 5

Captive Screw

Connector

Figure 3. Power Connector Wiring

ATTENTION: Potential Damage to Property.

•Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the end product.

•Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling spaces or in wall cavities. The power supply is to be located within the same vicinity as the Extron AV processing equipment in an ordinary loca- tion, Pollution Degree 2, secured to the equipment rack within the dedicated closet, podium or desk.

•The installation must always be in accordance with the applicable provisions of National Electrical Code ANSI/NFPA 70, article 75 and the Canadian Electrical Code part 1, section 16. The power supply shall not be permanently fixed to building structure or similar structure.

•When you connect the power supply, voltage polarity is extremely important. Applying power with incorrect voltage polarity could damage the power supply and the amplifier. Identify the power cord negative lead by the ridges on the side of the cord.

NOTE: Do not tin the stripped power supply leads before installing the captive screw

connector. Tinned wires are not as secure in the connectors and could pull out. Strip

the power cord jacket 5 mm from the end.

CAUTION: Possible Electric Shock.

The two power cord wires must be kept separate while the power supply is plugged in. Remove power before continuing.

To verify the polarity before connection, plug in the power supply with no load and check the output with a voltmeter.

P/2 DA2xi MT User Guide User Guide • Installation

68-713-01, P/2 DA2XI MT specifications

Extron Electronics is renowned for its high-quality audio-visual solutions, and one of its standout products is the P/2 DA2xi MT. This distribution amplifier is engineered to meet the demands of professional audiovisual applications, and it integrates exceptional performance with user-friendly features.

The P/2 DA2xi MT is designed to distribute a single input signal to multiple outputs, ensuring that the integrity of the video signal is maintained across various endpoints. With the ability to distribute signals to two outputs, this device is particularly useful in settings such as classrooms, conference rooms, and control centers where the same content needs to be displayed on multiple screens.

One of the key features of the P/2 DA2xi MT is its compatibility with a wide range of video formats, including HDMI and component video. This versatility makes it an ideal solution for environments where multiple formats are in use. Additionally, it supports resolutions up to 1080p, ensuring that high-definition content is delivered without loss of quality.

The P/2 DA2xi MT employs Extron's patented technology, which includes features such as input and output sync processing. This capability ensures that the video signals are synchronized for seamless viewing across multiple displays. It also includes signal amplification, which enhances the integrity of the signal over longer cable runs, reducing the risk of degradation caused by cable lengths.

Another advantage of the P/2 DA2xi MT is its straightforward operation. The device features intuitive controls, allowing users to easily manage outputs and settings. Furthermore, it is rack-mountable, which simplifies integration into existing AV setups.

Power management is also an essential consideration, and the P/2 DA2xi MT is designed for low power consumption. This not only makes it energy-efficient but also reduces operational costs for users.

In terms of build quality, the P/2 DA2xi MT features a robust construction, designed to withstand the rigors of daily use in demanding environments. Its compact form factor allows for easy installation, ensuring it fits conveniently into various AV setups.

Overall, the Extron P/2 DA2xi MT distribution amplifier is a feature-rich, versatile solution that excels in delivering high-quality video distribution while maintaining ease of use and reliability in a variety of applications.