Haier DWL3025 installation manual If you have Go to Step, 11a. Waste disposer + air gap

Page 13

7.Measure overall length of copper tubing “G” required.

Attach copper tubing to water line with manual shutoff valve. Carefully feed copper tubing through hole in cabinet (copper tubing will bend and kink easily) until it is far enough into the cabinet opening to connect it to dishwasher inlet on the front left of dishwasher.

8.Turn shutoff valve “H” to “ON” position. Flush water into a bucket to get rid of particles that may clog the inlet valve.

9.Turn shutoff valve to “OFF” position.

Drain Hose

10. Cut a 1½” (3.8 cm) diameter hole in cabinet wall or floor on the side of the opening closest to the sink.

11.Connect drain hose to waste tee or waste disposer following one method.

If you have:

And:

Go to Step:

 

 

 

A Waste Disposer

An Air Gap

11a.

 

 

No Air Gap*

11c.

 

 

 

 

No Waste Disposer

An Air Gap

11b.

 

 

No Air Gap*

11d.

 

 

 

 

* An air gap is recommended

11a. Waste disposer + air gap

1. Remove the disposer knockout plug.Cut end of drain hose “I” if needed (do not cut ribbed section).

2. Attach drain hose to air gap “J” with large spring-type clamp “K”. If the drain hose was cut, use a 1½” to 2” (3.8 to 5 cm) screw-type clamp*.

3. Use a rubber hose connector* “L” with spring or screwtype clamps* “M” to connect air gap to disposer inlet “N”. This connection “N” MUST be before drain trap “O” and at least 20” (50.8 cm) above the floor where dishwasher will be installed. Go to step 12.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Installation Manual Table of Contents Doing so will Make installation easier Before Using the DishwasherSee warranty information Tools and Materials Needed ALL InstallationsParts supplied a drain hose clamps Addition for new installationsLarge Drain hose Make sure all these parts are includedCabinet Requirements RequirementsIf connecting dishwasher with a power supply cord If direct wiring dishwasherElectrical Drain WaterYou must have You mustDirect Wire Cabinet DimensionsPower Supply Cord Water LinePrepare Cabinet Direct WiringIf you are replacing a dishwasher If you are Use StepsCut a ½ 1.3 cm minimum hole F in left-hand cabinet 3a. Power supply cord method11a. Waste disposer + air gap If you have Go to Step11d. No waste disposer + no air gap 11b. No waste disposer + air gapParts available from local plumbing supply stores Tip Over Hazard Prepare DishwasherHelpful TIP Built-up floors Removed, protect the floor when moving the dishwasherStand dishwasher upright Push on Front of Panel or on Console They MAY Dent Helpful TIP Connect Dishwasher Direct Wiring Using a Power Supply cordElectrical Connection White Black Ground Wire Direct wire method1a. Power Supply Cord Method Tighten clamp connector or conduit connector screws GDo not leave the box without the cover To prevent vibration during operation, route Drain ConnectionSecure Dishwasher If Dishwasher Does Not Operate Check OperationSide view Haier America New York, NY

DWL3025 specifications

The Haier DWL3025 is a compact and versatile dishwasher designed to meet the needs of modern households while providing efficient performance and user-friendly features. This appliance stands out in the crowded market of kitchen appliances with its impressive array of technologies and characteristics that cater to convenience and sustainability.

One of the main features of the Haier DWL3025 is its innovative design, which accommodates a variety of dishware, from small plates to large pots. Its adjustable racks and foldable tines allow for flexible loading, making it easier to fit different types and sizes of dishes. This is particularly beneficial for families or individuals who frequently entertain guests.

Another significant aspect of the DWL3025 is its advanced cleaning technology. Equipped with multiple wash programs, this dishwasher offers tailored solutions for different cleaning needs. Whether it’s a quick wash for lightly soiled dishes or a heavy-duty cycle for pots and pans, users can easily select the appropriate setting for optimal results. The inclusion of a delicate wash cycle also ensures that fragile items, like glassware or china, are cleaned safely.

The Haier DWL3025 is designed with energy efficiency in mind. It boasts a high energy rating, helping users save on electricity bills while minimizing their environmental footprint. Its water-saving technology is particularly noteworthy, utilizing less water per wash cycle compared to traditional dishwashers without compromising on cleaning performance. This makes it an ideal choice for eco-conscious consumers.

Additionally, the DWL3025 features a noise-reduction system, making it one of the quieter appliances in its category. This allows it to operate without disturbing household activities, even during evening hours. Its intuitive control panel further enhances usability, allowing users to easily navigate through the different settings and options.

In summary, the Haier DWL3025 dishwasher is a powerful and efficient kitchen appliance that combines innovative features with energy-saving technology. Its versatility in loading, various wash programs, environmental considerations, and quiet operation make it a strong contender for anyone seeking a reliable dishwasher that fits seamlessly into a contemporary lifestyle. Whether for everyday use or special occasions, the DWL3025 ensures that your dishes come out sparkling clean, leaving you with more time to enjoy your meals.
Top Page Image Contents