Haier DW12-PFE1ME manual Important information, Information on loading the dish washer

EN

Plastic items are discoloured

Not enough detergent was added to dispenser.

Detergent has insuffcient bleaching properties. Use a detergent containing a

chemical bleaching agent.

White stains are left on crockery, glasses have a milky appearance

Not enough detergent was added to dispenser compartment.

Amount of rinse-aid was set too low.

Although water is quite hard, no salt has been put in appliance.

Water softener was set too low.

Lid on salt container is not screwed tight.

If you used a phosphate-free detergent , try a detergent containing phos- phates and compare results.

Dishes,cultlery,etc.have not been dried

Selected programme did not include drying function.

Amount of rinse-aid was set too low.

Items were removed from dishwasher too soon.

Glasses have a dull appearance

Amount of rinse-aid was set too low.

Tea stains or traces of lipstick have not been completely removed

Detergent does not have a sufficient bleaching effect.

Washing temperature was set too low.

Traces of rust on cutlery

Cutlery is not sufficiently rustproof.

Salt content in washing water is too high.

-Lid on salt container is not screwed tight.

-Too much salt was spilt while filling container.

Glasses become clouded and discoloured; coating cannot be wiped off

Unsuitable detergent was used.

Glasses are not dishwasher-proof.

Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance

Amount of rinse-aid set too high.

Important information

Notes on waste disposal

Old appliances still have some residual value. An environment-friendly method of disposal will ensure that valuable raw materials can be recovered and used again.

When an appliance has reached the end of its working life,unplug it from the mains.Cut through the mains cable and dispose of it together with the plug. Destroy the door locking mechanism. This will ensure that children at play can- not become locked inside and are not exposed to the risk of suffocation. Your new appliance was protected by suitable packaging while it was on its way to you. All materials used for this purpose are environment-friendly and can be recycled. Please make a contribution to protecting the environment by dis- posing of the packaging appropriately.

Do not allow children to play with any parts of the packaging. There is a risk of suffocation by the cardboard boxes and the plastic wrapping.

Up-to -date information concerning options for disposal can obtained from your retailer or local municipal administration.

Information on loading the dish washer

Below is an example on how to load this dish washer Figs 1-2.

Fig.1 Fig.2

General information

Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.

For Switzerland only:

There are no restrictions on installing the appliance between wooden or plastic walls as part of a fitted kitchen. If the appliance is not plugged into a wall socket, it must be connected to the mains via a separator for all poles within the domestic wiring system. This device must have a gap of at least 3mm between open contacts, in order to conform with relevant safety regulations.

9