InSinkErator 2200 owner manual Installing Filtration System, Press in again to ensure a secure fit

Page 9

5

INSTALLING FILTRATION SYSTEM

A

Personal Injury: Do not locate filter above an outlet or other electrical device. Install head and bracket so that connections require no stretching, kinking or pinching of tubing.

QMark hole locations for filter head and bracket in a spot that allows for filter replacement.

QDrill 1/8" starter holes and attach bracket to wall with wood screws, turning until snug.

QRemove red filter cap, insert filter cartridge into filter head and twist clockwise until “LOCK” arrow on the filter aligns with arrow on bracket.

B

from water

to dispenser

supply line

 

 

 

 

 

 

 

Property Damage: Tube runs need to form to the cabinet’s contours to allow storage space with no sharp bends. Tubes need clean, perpendicular, burr-free cuts to ensure a true fit.

QDetermine length of tubing required, then cut to length making sure the cut is perpendicular and burr-free.

QInsert a white 3/8" tube into inlet side of filter head until it stops.

Press in again to ensure a secure fit.

QInsert the other white 3/8" tube into outlet side of filter head until it stops. Press in again to ensure a secure fit.

C Hot & cool models

From filter or

water supply line

Hot only models

Plug

From filter or

water supply line

Q Insert the copper tube(s) from the

dispenser into the 3/8" to 1/4"

quick-connect fitting.

Q Connect the white 3/8" tube

from the right outlet on the filter

head into the quick-connect fitting

until it stops. Press in again to

ensure a secure fit.

Property Damage: Do not extend the copper

lines farther than the 16" provided.

To remove tube(s) or plug from quick-connector,

depress the release ring and gently pull away.

D

Discharge

tube

From water

To dispenser

supply line

 

It is normal for approximately 2 oz. of water to

discharge when filter is removed.

QTo redirect filter replacement water discharge, place 6" clear tube over vent hole on the left side of filter head.

QNote: 3/8" fitting is required to make connection to water supply.

QConnect remaining white 3/8" tube to incoming water supply line.

(See Step 6.)

9

Image 9
Contents Instant Hot Water Dispenser What YOU should Know Before YOU Begin Straighten the copper tubing Unpack dispenser componentsSemi-circular Mounting Plate Hex Tool Components in this PackageFilter Head Fitting 3 piecesIf Installing only NEW Faucet If Installing only NEW TankProperty Damage That operates your disposer PreparationMake sure to use rubber O-ring To ensure proper seal Installing the FaucetConnecting Faucet to Tank Mounting the TankTank must be mounted level to ensure proper operation Press in again to ensure a secure fit Installing Filtration SystemUntil it stops. Press in again to Ensure a secure fitFinal Water Connection Year warranty excluding replaceable filter cartridge Warranty InformationCare and USE Adjusting the ThermostatFiltration Information Troubleshooting 800.558.5700

2200 specifications

The InSinkErator 2200 is a top-of-the-line food waste disposer designed to enhance kitchen efficiency and sustainability. As part of the InSinkErator family, it is renowned for its powerful performance, durable design, and innovative technology.

One of the standout features of the InSinkErator 2200 is its robust .75 horsepower motor. This high force allows the unit to easily grind through a wide variety of food waste, from soft fruits and vegetables to tougher items like bones and fibrous materials. This means users can dispose of kitchen scraps with minimal effort, reducing the need for frequent trips to the garbage bin.

The 2200 also incorporates the Quick Lock technology, which enables easy installation and replacement. This feature allows owners to effortlessly switch out their disposer with its simple twist-on, twist-off design. This ease of use saves time and ensures that even those who may not be technically inclined can set up or replace the unit with ease.

Another remarkable aspect of the InSinkErator 2200 is its noise reduction technology. The unit is equipped with sound insulation that significantly minimizes operational noise, making it less disruptive during use. This is particularly advantageous for households that prioritize a quiet kitchen environment.

In addition to its functional features, the InSinkErator 2200 emphasizes energy efficiency. The unit is designed to consume less electricity while still delivering powerful performance. This is achieved through its efficient motor technology that helps to keep energy costs low without sacrificing grinding capabilities.

Additionally, the disposer has a space-saving design that makes it easy to install under most kitchen sinks without taking up too much room. The grinding chamber is constructed from high-quality, corrosion-resistant materials, ensuring longevity and reliability.

For households focused on sustainability, the InSinkErator 2200 is an eco-friendly choice. By efficiently grinding food waste, it reduces the volume sent to landfills and supports composting efforts, allowing users to contribute positively to environmental conservation.

Overall, the InSinkErator 2200 stands out in the market for its combination of power, ease of use, and environmentally conscious design, making it an ideal choice for modern kitchens seeking to manage food waste effectively.