Installation Instructions
1.Please read this manual before operating the grinder.
2.Carefully remove grinder from carton.
3.Place grinder in position on shelf, counter or flat surface.
4.Plug grinder into standard electrical outlet. Avoid using an extension cord.
5.Grind a small amount of whole bean coffee following operating instructions as described in this manual.
6.If there is any problem, consult the Trouble Shooting Guide in this manual and also on the back of your grinder.
7.If you still cannot correct a problem, call Grindmaster Corporation’s Technical Service Department for help,
(800) 568-5715 M-F 8 AM - 6 PM EST.
Instructions
Your new coffee mill is easy to operate and maintain. Before you place it in service, please have all personnel familiarize themselves with these instructions; then keep this manual in a convenient place for ready reference.
Set-up Procedures
1.You, the user, must determine the quantity of coffee you want to dispense as various types of coffee and brewing equipment require different quantities to obtain a quality cup of fresh ground, fresh brewed coffee.
Note: Because of the inherent properties of some decaffeinated coffee, it may be necessary to dispense a slightly greater amount to achieve the desired level of flavor extraction as in regular coffee. This should be evaluated based on the coffee you use as well as the brewing equipment used.
2.Adjust the timer inside the grinder if necessary, to dispense the desired weight of ground coffee (see Timer Adjustment Section on page 3). All grinders are factory set to deliver approximately 2 ounces of ground coffee. This weight is approximate, as the density of all coffee beans is not the same. The only way to ensure the desired portion is being dispensed is to weigh the coffee after it has been ground.
3.The grind texture can be adjusted, if necessary, to a finer or coarser grind (see “Grind Adjustment” section on page 5). The grind is factory set to deliver a standard autodrip grind.
How to Operate
1.Fill the hopper with the appropriate amount of whole bean coffee.
2.Place the brew basket with coffee filter on rails (or basket arms).
3.Choose the type of coffee you wish to grind by pressing the rocker selection switch.
4.Push the start button on the front of the grinder.
5.When grinder stops, remove the brew basket.
115 & 250 Series Coffee Grinders | Page 2 |
|
|