Extron electronic IN3254 user manual Input and output connections

Introduction, cont’d

VIDEO GAIN

SYNC LEVEL

HI

LOW

X1.3

X1

Sync Level: Set this switch to adjust the sync

portion of the video with the sync signal. HI — Applies 5 volts peak-to-peak. LOW — Applies 3 volts peak-to-peak.

NAdjustments apply to all four outputs.

Input and output connections

RGB and component video inputs — Connect an RGBHV, RGBS, RGsB, RsGsBs component video, S-video, composite video source to these BNC connectors.

RGB and component video outputs — Connect RGB or component video displays or other devices to these BNC connectors for each video output.

Connect the cables for the desired input or output signal, as shown below.

		RGsB,
		RsGsBs,
RGBHV	RGBS	Component	S-Video Composite

R

G

B

H

V

NWhen making connections, ensure that inputs and outputs are using the same signal (e.g., S-video BNCs are connected on both input and output connectors).

1-6 IN3254 • Introduction