Manitowoc Ice installation instructions K00017 Stacking KIT, Installation Instructions

Page 1

K00017 STACKING KIT

Installation Instructions

1.The K00017 stacking kit is used for stacking an E-0400

on an E-0600 ice machine.

The bin must be leveled

4. INSTALLATION OF WATER SHIELD:

before proceeding. NOTE:

THIS STACKING KIT IS

A.

Remove angle “A”, the water pump, float valve

ALSO USED, WHEN STACKING G-0600 ON G-0800

 

bracket assembly, and sump trough from top ice

ICE MACHINES.

 

 

machine.

2. INSTALLATION OF E-0600 ICE MACHINE:

B.

Remove existing sheet metal screw at lower right

A.

See service manual for uncrating and inspection of

 

corner of bulkhead below siphon tube. Locate water

 

ice machine.

 

 

shield above the lower machine’s electrical box. Use

B.

Remove top cover from ice machine (NOTE: do not

 

existing screw to fasten flange of shield to bulkhead.

 

put screws back in.).

 

 

Apply RTV sealant to the top edges of flange to

C. Set ice machine carefully and squarely on bin.

 

provide a watertight seal.

D. Position shim angle, provided in kit, on right side, as

C. Reinstall the sump trough, float valve bracket

 

shown in Illustration 1.

 

 

assembly, and water pump.

E.Add foam tape, as shown in Illustration 1.

F.With four screws, install top cover from kit on left

 

side of ice machine (NOTE: flange goes over side

5. INSTALLATION OF ICE CHUTE:

 

panel.).

A.

Remove the ice chute from kit and set bottom

G.

Remove right-hand side panel.

 

mounting brackets over angle “B” on E-0600 ice

3. INSTALLATION OF E-0400 ICE MACHINE:

 

machine (Illustration 3).

A.

See service manual for uncrating and inspection of

B.

Put angle “A” in slots of top mounting brackets and

 

ice machine.

 

secure in place.

B.

Remove right-hand side panel and bottom four

C.

Check for free movement of water curtains.

 

screws on left-hand side panel.

D.

Proceed to ice machine service manuals for electrical

C.

Set E-0400 ice machine on E-0600 ice machine with

 

and water hook-up and start-up procedure.

 

right-hand sides in line (NOTE: flange on top cover

 

 

 

should be inside left-hand side panel.).

 

 

D.Install four screws in bottom left-hand side panel.

E.Bolt right-hand sides of ice machines together with 1/4-20 x 5/8” long bolt, lock washer, and nut, provided in kit.

F.Reattach right-hand side panels.

Manitowoc Ice, Inc.

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA

 

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879

8001403

Web Site - www.manitowocice.com

Rev. 05/11/01

Page 1 Page 1
Image 1
Page 1 Page 1
Contents K00017 Stacking KIT Installation Instructions

K00017 specifications

The Manitowoc Ice K00017 is a state-of-the-art ice machine known for its reliability, efficiency, and innovative design. A part of Manitowoc's renowned series, this model is purpose-built to meet the demanding needs of commercial environments, from restaurants to hotels and bars.

One of the standout features of the K00017 is its impressive ice production capacity. Capable of producing a substantial amount of ice daily, it ensures that businesses can meet peak demand without interruptions. The machine creates ice in various forms, such as full cube and half cube, allowing operators to choose the right type for their particular application. This versatility is crucial for different drinks, food presentations, or cooling needs.

The Manitowoc K00017 incorporates advanced technology to enhance its performance and maintain energy efficiency. It utilizes a proprietary control system that optimizes the ice-making process, allows for easy monitoring, and simplifies troubleshooting. This system is designed to minimize energy consumption, thus helping businesses save on utility costs while also being environmentally friendly.

Another notable characteristic of the K00017 is its water filtration system. It comes equipped with built-in filtration that helps remove impurities from the water supply, resulting in cleaner, clearer ice. This not only improves the quality of the ice produced but also extends the machine's lifespan by reducing mineral buildup and the risk of clogs.

Ease of maintenance is a critical aspect of the Manitowoc K00017 design. The machine features a front-access panel that allows for quick access to key components, facilitating regular cleaning and servicing. Routine maintenance is essential in keeping the equipment running smoothly and prolonging its operational life.

In terms of durability, the Manitowoc K00017 boasts a robust construction using high-grade materials designed to withstand intense use in busy commercial settings. The machine's stainless steel exterior is not only visually appealing but also resistant to corrosion and stains, ensuring it remains looking new even under continuous use.

Overall, the Manitowoc Ice K00017 offers an exceptional combination of performance, efficiency, and ease of use, making it an ideal choice for businesses that require a reliable ice-making solution. With its advanced features and practical design, this ice machine stands out as a leader in commercial ice production.
Top Page Image Contents